Matrix Smart User Manual

5. Covers:

Lower Backs are supplied with 'Pop-on', machine washable cloth covers that use an an -
microbial fabric.
These machine-washable covers are a"ached to the Smart Back using a
black upholstery peg that fits into (pop-in) the centre of the 4ball unit.
These can be ejected from the 4ball using a special tool we can
supply. Alterna vely, if carefully done, the black uphol-
stery pegs (on the back of the cover) can be pulled out
by hand. Make sure when replacing a cover a+er
washing that the pegs are located correctly (not
off centre) in the 4balls so there is a uniform over-
lap, about 30mm, around the outside edge of the Ma-
trix.
When washing these covers do so at low temperature without aggressive
spinning. Air dry (do not tumble dry) to preserve flame retardant and an
microbial proper es of the internal foam and cover material.
matrix
our products support you
Page 4
Website: www.matrixseating.com
Email: sales@matrixseating.com
Phone: 01747 850022
U G
1. Introduction:
Matrix Smart Backs arrive anatomically shaped and ghtened ready for delivery. Below is
the Lower Back shape (Matrix layout on the le+) and on the right is the Lower Back with a
'Pop-on' cover. The table on the le+ gives the surface dimensions of the shapes (called
'Circumference') and in the right table the op ons are shown. In addi on to covers the
Backs can come with T-Trak or Pivot Moun ng hardware.
Lower Back shape
Height x Width
Small Medium
(
Circumference)
Lower Back 280 x 400 360 x 510
Page 1
: Matrix Smart
Lower Back with' Pop-on' Cover
Matrix Smart Op ons:
Large
Pop-on Cover,
430 x 580
V-Trak parts, or
Pivot mount