The aq-swa8-1bt active subwoofer is a high quality, robust and durable subwoofer with built-in amplifier and outputs for connection of standard full range speakers. tuned port for enhanced bass response. designed and built to withstand the harsh ipx4 cond (10 pages)
Combined bluetooth stereo subwoofer with bluetooth & full range speaker outputs (11 pages)
Summary of Contents for Aquatic SWA6+
Page 1
SWA6+ COMBINED BLUETOOTH STEREO SUBWOOFER with Full Range Speaker Outputs USER / INSTALLATION MANUAL R A D I O CHARGING PLEASE READ THIS INSTRUCTION MANUAL BEFORE R A D I O INSTALLATION AND OPERATION...
Getting Started Combined Stereo Subwoofer SWA6+ Congratulations on the purchase of the SWA6+ Combined Stereo Subwoofer with Bluetooth and USB connectivity and two full range speaker outputs. With the right care and attention it will give you many years of trouble free operation. Before operating the system, please read this manual fully to obtain the best results from your new product, and retain it for future reference.
Allows the output level to be adjusted from a factory preset of -3dB to either -6dB, 0dB or +6dB. See section 1.6 for further details. Aquatic AV does not recommend the wired remote control WR6 for use in spa applications. *Retail packaged models only.
1.4 12-pin Harness Connection (retail packaged models only) If your SWA6+ was purchased from an Aquatic AV dealer and/or supplied with retail packaging it is supplied with the Aquatic AV universal harness AQ-UNH-2 in order to connect the power and speakers.
Getting Started Combined Stereo Subwoofer SWA6+ 1.5 Bluetooth Halo Aerial Technology Antenna The Bluetooth Halo Aerial Technology antenna AQ-BTANT-1 (included) improves the standard Bluetooth wireless signal and range, for a stronger signal and increased range. Please read the precautions and installation instructions below before installing the AQ- BTANT-1 Bluetooth Antenna.
For detailed instructions you can check out our online video: ‘How to wire your Aquatic AV stereo system’ http://www.aquaticav.com/support/videos www.aquaticav.com...
Getting Started Combined Stereo Subwoofer SWA6+ 1.8 Handheld Remote Control Charging The remote has a built-in Polymer Lithium rechargeable battery and comes with a charging cable. Connect one end of the charging cable to the charging connection on the remote control and con- nect the USB end of the charging cable to any USB charger (5V DC) for charging.
Remote Control Functions Combined Stereo Subwoofer SWA6+ 2.1 RF6 Wireless Handheld Remote Control Next Folder Random Playback Previous Folder Save & Exit Audio Menu www.aquaticav.com...
1A of current to charge a device battery. 3.2 Listening via Bluetooth Audio 3.2.1 Pair with Bluetooth Audio Device 1. Switch on your Bluetooth Audio device. 2. Select ‘AQUATIC AV SW620’ from the list of available devices to pair (no password is needed). www.aquaticav.com...
Listening to Devices Combined Stereo Subwoofer SWA6+ 3.2.2 Listening via Bluetooth Audio Device 1. Bluetooth Audio mode will be activated once a Bluetooth Audio device is paired in any mode. Use MODE to change to the Bluetooth Audio mode to listen to music. 2.
Listening to FM Radio Combined Stereo Subwoofer SWA6+ 4.1 Enter FM Radio Mode 1. Press MODE on the remote control to switch to FM radio mode. 2. Press PLAY/PAUSE to mute or unmute the audio. If this is the first time you listen to FM radio, the default frequency will be 87.5MHz, as shown on the remote LCD.
If using two external trigger wires you can also activate the second external trigger by pressing and holding the 12V TRIGGER button to activate. Press and hold again to deactivate. Aquatic AV strongly recommend you speak to our technical service staff or your local Aquatic AV dealer if you are considering using this feature.
Position 86: position 86 is triggered 12V, and is sent when your stereo is powered on. For Aquatic AV stereos position 86 can be connected to either the blue remote wire in the harness or the brown 12V trigger on the rear of the unit. The differences are below: Blue (recommended): The blue (remote wire) provides a 12VDC output when the stereo is powered on.
Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for Aquatic AV any other liability in connection with the sale of the product. How to obtain service You must obtain a return material authorization number (RMA) to return any product to Aquatic AV.
Page 17
FCC Statement Combined Stereo Subwoofer SWA6+ FCC ID: MADE IN CHINA FCC Statement to the User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 18
Aquatic AV 282 Kinney Drive San Jose, CA 95112, USA E-mail: info@aquaticav.com US & Canada: 1 877 579 2782 International: +1 408 559 1668 Fax: +1 408 559 0125 www.aquaticav.com...