Sharp XFlat 20F650 Operation Manual page 8

Quick Reference Control Operation (Continued)
• Part Names
Basic Remote Control Functions
POWER
Press → On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories
A, B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 33.)
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
MUTE
Press → Mutes sound.
Press again → Restores sound.
• CLOSED CAPTION appears when
sound is muted.
POWER (DVD/VCR)
Press → On.
Press again → Off.
DVD/VCR CONTROL
See page 41.
REC
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark
display on the remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
8
POWER CATV TV
DVD VCR
DISPLAY INPUT
1 2 3
4 5 6
7 8 9
FLASHBACK ENTER
0 100
PERSONAL PREFERENCE
A B C D
CH
8
VOL VOL
; :
– +
9
CH
MENU MUTE g SKIP f
9 VCR-CH 8
POWER (DVD/VCR)
PLAY
:
REC
REW FWD
L STOP
( )
PAUSE
J
TV • CATV • VCR • DVD
Infrared Transmitter Window
CATV/DVD-TV/VCR MODE buttons
Press TV/VCR, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
Press CATV/DVD, sends power and
channel select commands to a cable
TV converter and DVD control.
DISPLAY
Press → Displays receiving channel
for four seconds.
Press again → Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press → Switch to external video
INPUT 1 mode or COMPONENT mode.
Press 2 times → Switch to external
video INPUT 2 mode.
Press 3 times → Switch back to the
original TV mode. See page 39.
ENTER
Used in some instances where a
Cable Converter Box requires an
"enter" command after selecting
channels, when using the REMOTE
KEYPAD button. (See page 41)
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
• See pages 30 ~ 32 for channel
presetting.
• Moves the " a " mark of the MENU
screens.
SKIP/VCR-CH