Page 5
4994 Concept Shower Bath:Layout 1 02/10/2017 09:54 Page 5 CONCEPT ACRYLIC SHOWER BATH BATH CONDITION Before commencing installation, carefully remove packaging/protective film and check for damage. If damaged, report immediately to supplier. The bath should be fully protected during the installation process.
Page 7
4994 Concept Shower Bath:Layout 1 02/10/2017 09:54 Page 7 CONCEPT ACRYLIC SHOWER BATH 8. Fit the two wall fixing brackets to bath frame as indicated in Fig. 6 and Fig. 1. Pilot drill holes (Ø 2mm) in frame before fixing brackets.
Page 8
4994 Concept Shower Bath:Layout 1 02/10/2017 09:54 Page 8 CONCEPT ACRYLIC SHOWER BATH Fixing the bath panel 15. Pre fit front panel ensuring that the ends of the panel are vertical. Mark a line along the front of the panel on the floor. Remove panel and fix the plastic panel clips (Ref. T) onto the floor/wall(s) (Figure 7).
Page 9
4994 Concept Shower Bath:Layout 1 02/10/2017 09:54 Page 9 CONCEPT ACRYLIC SHOWER BATH CARE OF BATH This bath left our works in first class condition and the following points should be noted; TO AVOID DISAPPOINTMENT, PLEASE REMOVE THE PROTECTIVE FILM AND INSPECT BEFORE INSTALLATION.
This covers products in domestic use by the consumer and not commercial or business use. All Ideal Standard products must be installed, used and cared for in line with our fixing instructions, local water byelaws and current water regulations. Access should always be left for installation, service and repair.
Page 12
4994 Concept Shower Bath:Layout 1 02/10/2017 09:54 Page 12 CONCEPT ACRYLIC SHOWER BATH CUSTOMER CARE HELPLINE 0870 1296085 CUSTOMER CARE FAX LINE 01482 499611 email: ukcustcare@IdealStandard.com The Bathroom Works We pursue a policy of continuing improvement in design National Avenue and performance of our products.
Need help?
Do you have a question about the CONCEPT and is the answer not in the manual?
Questions and answers