Subscribe to Our Youtube Channel
Summary of Contents for WLINK D800 series
- Page 1 User Manual ---Apply to D80 series Industrial 4G/3G DTU V1.2 http://www.wlink-tech.com May, 2017...
- Page 2 Due to product updates or functional upgrading, we may renew the content of this file, and this file only for reference. All statement, information, suggestion.etc in this file do not compose any form of guarantee and we WLINK reserves the right of final explanation. Shenzhen WLINK Technology Company Limited 3F, Yiben Building, Chaguang Road, Xili, Nanshan District, China, 518054 Add：...
-
Page 3: Table Of Contents
1.1 Product Overview....................... 3 1.2 Typical Application Diagram..................... 3 1.3 Features..........................4 2 Hardware Installation........................5 2.1 LED Status...........................5 2.2 Dimension..........................6 2.3 How to Install........................6 3 DTU Configuration........................8 3.1 Serial Port Settings......................8 3.2 DTU Configuration......................11 3.3 DTU Typical Application(point to point).................18 www.wlink-tech.com... -
Page 4: Product Introduction
Product Introduction Product Overview The rugged D800 series DTU (Data Terminal Unit) which is a cellular modem have been developed especially for M2M application. It provides RS232/RS-485/RS-422/TTL interface and equipped with PPP, TCP/IP and DDP protocol, it could convert the user data into 4G, 3G, EDGE or GPRS network and transmits the data to the customer’s data... -
Page 5: Features
Support transparent data transmission Support data service center with dynamic IP address Support LED status indication Wide range voltage input Smart power management External power on/off control Reliable, flexible and easy to deploy www.wlink-tech.com... -
Page 6: Hardware Installation
LED Status LED indicator Status silk-screen color status Indication Weak Signal CSQ<20 Green Good Signal CSQ>21 Fast Blinking Self-checking Light on Standby 2s,Light off 1s Light on 1s, Online Light off 2s Green Light on DTU system runs www.wlink-tech.com... -
Page 7: Dimension
DTU User Manual Dimension How to Install 2.3.1 SIM/UIM card installation Open SIM shelter by screw-driver, then insert SIM/UIM card. SIM/UIM Card Before connecting, please disconnect any power resource of DTU www.wlink-tech.com... - Page 8 Please connect the antenna before connect the power cable, otherwise because of impedance mismatching, the signal maybe poor. Notice: Step 1 Check antenna connection. Step 2 Check SIM/UIM card, configure SIM/UIM card is available. Power on DTU Step 3 www.wlink-tech.com...
-
Page 9: Dtu Configuration
DTU Configuration Serial Port Settings Run DTU Config Tool and select serial port, then setup serial port parameters in the bottom of DTU Config Tool as below. Baud: 57600bps DataBits: 8bit Parity: NULL Stop Bits: 1bit Flow Control: NULL www.wlink-tech.com... - Page 10 Click Connect button, The DTU will be connected to this software and enter configuration mode. If connection is successful, it will display Connected DTU in the status bar. 【Connect】Connect DTU 【Close serial】Close serial port to leave configuration mode. 【Read from file】Read settings file in the software. www.wlink-tech.com...
- Page 11 DTU User Manual 【Save to file】Save current settings to file. It’s convenient to butch setup. 【Default】Setup DTU to default settings. 【Get】Inquiry current DTU setting. 【Save】Save settings to DTU. www.wlink-tech.com...
-
Page 12: Dtu Configuration
Debug Info Control serial port debug information NULL/DEBUG/STATUS/AT. Configure AT NULL level during testing with PC. Configure NULL, then connect DTU to device. [NULL] DTU won’t send any information to serial. [DEBUG]DTU sends simple information to www.wlink-tech.com... - Page 13 Ping IP address Check destination IP address 0.0.0.0 Ping Domain Check destination domain name. If IP 0~63byts NULL Name 0.0.0.0 and domain name is null, Ping is disable. Interval PING check interval when idle. 0~255mins 0 indicates PING is disable status. www.wlink-tech.com...
- Page 14 Only when setup center IP as 0.0.0.0, it’s Name just available. Third center IP Third Data server center IP 0.0.0.0 address(static IP address) Port 0~65535 40003 Connect Type UDP/TCP Third Domain No static IP for server Only when setup center IP as 0.0.0.0, it’s www.wlink-tech.com...
- Page 15 Parameters Description Instruction Default Protocol Select NULL/DRMP/DDP [NULL] Transparent transmission. NULL [DRMP]WLINK transmission protocol. Custom ID Identify DTU in data server center 4byte length ID Position ID insert data package in order to 0~24bytes identify which DTU sent data. Custom...
- Page 16 After idle time, DTU will re-enter wake up mode. [SMS] DTU works short message mode. Idle Interval 5~65535s 300s Reconnect DTU reconnect to data center server 5~65535s 300s after interval time when connection is www.wlink-tech.com...
- Page 17 Remote management software static 0.0.0.0 IP address Remote Port 0~65535 40001 Remote Domain Short message and call wake up and 0~63bytes, NULL Name short message configuration from the Domain name is available when the IP specified number. address is setup 0.0.0.0 www.wlink-tech.com...
- Page 18 DTU User Manual 3.2.7 DTU Version settings DTU Version settings instruction Parameters Description Instruction Default Product type Product model Serial type Firmware version www.wlink-tech.com...
-
Page 19: Dtu Typical Application(Point To Point)
DTU establishes a TCP connection to data server center. DTU transmits serial port data to data server center by TCP protocol. DTU acts as TCP client as below settings. The serial port tool SSCOM32 simulates serial port device. TCP/IP net Assistant tool simulates data server center. www.wlink-tech.com... - Page 20 ONLINE Reconnect Interval Remote Start Interval Management Serial Port Status display After configured, please restart the DTU and run SSCOM32 serial port tool, it’ll display DTU work status. The hyper terminal tool is also available to display DTU status. www.wlink-tech.com...
- Page 21 DTU User Manual TCP connection is established. TCP Server Demo www.wlink-tech.com...
Need help?
Do you have a question about the D800 series and is the answer not in the manual?
Questions and answers