ICE TV SKIPPA Quick Setup Manual

Setting up your new SKIPPA
Step 1.
Connect your
SKIPPA
™
Step 2.
Connect to
your WIFI
Step 3.
Log into
IceTV on your
SKIPPA
™
Quick Setup Guide
TM
- Connect the HDMI cable from your SKIPPA to your TV.
- Connect the antenna cable.
- Connect the power cable and turn on SKIPPA. Turn on your
TV and select input source.
- Connect to your network via either an ethernet cable or the
built-in WIFI. If using an ethernet cable, skip Step 2.
to configure your WIFI network:
Press
- Set network mode to WIFI.
- Make sure AUTOMATIC CONFIGURATION is selected.
- Highlight CHOOSE NETWORK and press
WIFI network.
- Highlight PASSWORD and press
keyboard. Enter your WIFI password. You can switch to
SYMBOLS by pressing
your password.
- Press to connect to your WIFI network.
A status message will confirm the internet is available. Press Exit.
- Skippa requires an IceTV account. If you don't already have
an account, you can create one by selecting NEW USER,
and creating a password. If you have an account, or are
using the free IceTV app, choose EXISTING USER.
- Enter your EMAIL ADDRESS in the field provided.
- Enter your PASSWORD in the field provided.
- Press CONTINUE to proceed.
- For NEW USERS, select your REGION e.g. NSW - Sydney.
- Give your SKIPPA a name (e.g. Lounge) or simply leave the
default name, and press CONTINUE.
Congratulations! Press
is a simple 3 step process:
. Once finished press
to finish the SKIPPA Setup.
to select your
to open the on-screen
to SAVE