Related Manuals for RS PRO 791-8258
Summary of Contents for RS PRO 791-8258
- Page 1 Instruction Manual Halogen lamp with UK plug (791-8258) Halogen lamp with EU plug (791-8267)
- Page 2 Attention: Please read the following instructions carefully to ensure that mounting operation will be carried out in the right way .These instructions should be properly preserved for future reference. Main Construction Data: Maximum height Type Rated Power Glass Weight projected Dimensions Remark area...
- Page 3 NOTE: If your mains wiring differs in any way from Diagram A. Consult a qualified electrician. Always ensure that the mains supply voltage is correct. Always replace the fuse with one of an identical rating.The lighting direction can not be adjusted to down ward.If the external flexible cable or cord of this Luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Page 4 Fitting The Lamp: To fit the supplied halogen bulbs you need to loosen the screw (H) securing the hinged front cover and swing the cover down. The bulb is attached by spring-loaded holders at each end. Gently locate the bulb into position, ensuring good contact at both ends.
Need help?
Do you have a question about the 791-8258 and is the answer not in the manual?
Questions and answers