Download Print this page

Middle Atlantic Products PDC Series Operation Instructions

Controlled power center

Advertisement

Quick Links

CONTROLLED POWER CENTER
CONTROLLED POWER CENTER
120
12
60 Hz
SWITCHED
PDC-915R-6
ACTIVATION
120V 12A 60Hz
NO
Maintained
Surge
Status
THANK YOU
Thank you for purchasing the PDC Series Controlled Power Center.

Operation Instructions

PDC Series
FRONT VIEW
SURGE
PROTECTED
WHEN LIT
Stage 1
Stage 2
PROTECTION
NC
Momentary
Control
Relay
Status
(PDC-915R-6 Shown)
CONTROLLED
REAR VIEW
I
CONTROLLED OUTLETS
AUTO
OFF
ON
SWITCHED
Middle Atlantic Products
I-00420
Rev D

Advertisement

loading

Summary of Contents for Middle Atlantic Products PDC Series

  • Page 1: Operation Instructions

    60 Hz  SWITCHED PROTECTION PDC-915R-6 SWITCHED ACTIVATION CONTROLLED 120V 12A 60Hz Maintained Momentary Surge Control Relay Status Status Middle Atlantic Products REAR VIEW (PDC-915R-6 Shown) THANK YOU Thank you for purchasing the PDC Series Controlled Power Center. I-00420 Rev D...
  • Page 2: Important Notes

    IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS! DANGER HAZARDOUS VOLTAGE/DANGER HAUTE CONSERVER CES INSTRUCTIONS! TENSION The lightning flash with the arrowhead symbol, within an • Contains switched receptacle(s). To reduce risk of shock , disconnect the equilateral triangle is intended to alert the user to the device from the power source before servicing any connected presence of uninsulated dangerous voltage within the equipment...
  • Page 3 NEMA 5-15R Single Switched Receptacle REAR PANEL FUNCTIONS PDC-915R-6 SWITCHED CONTROLLED ACTIVATION 120V 12A 60Hz Maintained Momentary Surge Control Relay Status Status Middle Atlantic Products PDC-915R-6 PDC-915R-2 SWITCHED ACTIVATION CONTROLLED 120V 12A 60Hz Maintained Momentary Surge Control Relay Status Status...
  • Page 4 In addition to the LEDs, surge suppression component failure will be indicated by a dry contact closure via the rear terminal block. WARRANTY Middle Atlantic Products (the "Company") warrants the PDC Series to be free from defects in material or workmanship under normal use and conditions for a period of three (3) years from the date of shipment by the company.

This manual is also suitable for:

Pdc-915r-6Pdc-915r-2