Safety Tips - Buffalo CW306 Instruction Manual

Hide thumbs Also See for CW306:
Table of Contents

Advertisement

UK

Safety Tips

• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• DO NOT use jet/pressure washers to clean the appliance.
• DO NOT immerse the appliance in water.
• Do not overfill the water reservoir.
• Ensure the power cord never touches the hotplate.
• DO NOT touch hot surfaces.
• DO NOT touch the hotplate when the appliance is on.
• DO NOT leave the appliance unattended during operation.
• DO NOT remove the filter basket during the filtration process.
• Never leave the empty glass jug on the hotplate when the
coffee maker is on. Otherwise, the carafe is liable to crack.
• DO NOT place on or near hot surfaces such as a hob or
radiant rings or near a naked flame.
• Suitable for indoor use only.
• Always switch off and disconnect the power supply to the
appliance when cleaning or not in use.
• Never use accessories which are not recommended by the
manufacturer. They could pose a safety risk to the user and
might damage the appliance. Only use original parts and
accessories.
• This appliance must only be used in accordance with these
instructions and by persons competent to do so.
2
CW306_UK_A5_v1_20180621.indb 2
2018/6/21 17:08

Advertisement

Table of Contents
loading

Table of Contents