Before Starting Playback
Turning the Power On
POWER
ON/STANDBY indicator
AQUOS PURE MODE indicator
Turning the power on
Press POWER on the remote control or on the Player
to turn on the power of the Player.
Entering standby
Press POWER on the remote control or on the Player
to enter standby.
•
If you press POWER again immediately after entering
standby, the Player may not turn on. If this happens, wait
for 10 seconds or more and then turn on the power again.
NOTE
•
When the ON/STANDBY indicator is blinking (may take
some time), the Player cannot be turned on.
20
BD/DVD/CD mode indicator
Indicators on the Player
ON/STANDBY indicator
Green on
Red blinks
Red on
AQUOS PURE MODE indicator
Green on
BD/DVD/CD mode indicator
Off
Blue on
White on
White blinks
•
When you turn on the power, the Menu screen
automatically displays for a while.
Press EXIT to erase the display.
Power on
Preparing for standby
Standby
Output in AQUOS PURE
MODE (See page 22.)
No disc
Playing back
Disc stopped
Loading a disc