Contents Safety Information Specification Connection Accessories Header and Base bar Assembly Physical Connection Control System Service and Maintance Package - 2 -...
Read this manual before installing, powering or servicing this product, follow the safety precau- tions listed below and observe all warnings in this manual and printed on the product. If you have questions about how to operate the panel safely, please contact your ROE supolier. PROTECTION FROM ELECTRIC SHOCK Connect the product to AC mains power within the range 100-240V nominal at 50 or 60 Hz only Disconnect the product from power when not in use.
Page 4
Do not modify the product in any way not described in this manual. Install only genuine ROE parts in or on the product unless an alternative is described in this manual. Do not operate the product full load if the ambient temperature of power units (Ta) exceeds 45°C (113°...
Page 5
Data cables: The data cables provided with this system have special properties for safety. They are not user serviceable. If the data cables are damaged, replace them only with new ones. Never try to repair a data cable. Per req- uirements of the National Electrical Code in the USA, the length of a data cable must not exceed 100 m ®...
The finest pixel pitch and outstanding color processing ensures a high-end performance in TV studios and lecture halls. Black OnyX3 Specification: Black OnyX3 Dimensions: BO-3 500.0mm...
Dimension 0.35m L494×W158×D205mm Weight 0.16kg Weight 4.12kg Weight 0.08kg Material Cold Rolled Steel Name Power Cable Name Flightcase Part No. 208001S0796 Part No. 309003-00042 Dimension 0.30m Dimension L1334×W600×H885mm Weight 0.10kg Max Capacity 10 tiles of Black OnyX3 - 8 -...
Header and base bar Assembly: Hanging System Standard Header: Figure 1: Clamp Figure 2: Headers 158mm 494mm Hanging Installation 1. Fix the header on the Truss - 9 -...
Page 10
2. Connect BlackOnyX panels with the header ①Panels will be attached to the header by magnets automatically. ②Press the red button and lock the panels by vertical connector. ① ② Notes: (For Safety) Please do this by two persons. 3. Panels installation - 10 -...
Page 11
Stacking System Rear support truss Rear bridge Base bar Base truss Stacking Installation 1. Base bar connection with Base truss Connect the Base bar and Base truss by Vertical Connector. Lock of Base truss Rotatable Adjust the knob and make sure the base truss horizontal.
Page 12
2. Rear support truss and rear bridge installation 3. Panel installation - 12 -...
Physical Connection: Straight installation Horizontal connector operation Picture 1 Picture 2 Picture 3 Picture 4 Picture 5 1. Press the red button to loosen the handle.(pic2) 2. Pull the handle to turn the connecting bar.(pic3) 3. Connect two panels and align them.(pic 4) 4.
Control System: The control system of Black OnyX series consist of receiving card and sending card. Receiving card is integrated with LED panels. Working v oltage 100-240V AC Power < 20W Working temperature -20°C to 45°C Input port Output ports number 4 ports Communication port USB/RJ45...
Service and Maintance: Maintance: Picture 1 Picture 2 Picture 3 Picture 3 Easy Maintenance with push-out module and all the modules are the same design. 1. A single modules.(Picture 1) 2. Remove the screw in red.(Picture 2) 3. Hold the handle and push the module.(Picture 3) Application example Maintenance on overall installation, just replace the bad modules.
Package 10 pcs LED panels per Flightcase 40*20 Bumper strip 12mm Board 10mm Shock resistance high temperature resistant material 170KG Heavy Duty Caster Picture: - 16 -...
Page 17
Please, contact us for additional information www.EncoreX.net E-mail: info@encorex.net www.roevisual.com - 17 -...
Need help?
Do you have a question about the Black OnyX3 and is the answer not in the manual?
Questions and answers