HOW TO USE
TO CRUSH ICE
The ice crush function automatically operates as a pulse function.
While the blender is turned on (On Indicator Light will be on.), press and release the Ice Crush pad until ice is
TO USE PULSE MODE
While the blender is turned on (On Indicator Light will be on.), press the Pulse pad.
Both On Indicator Light and Pulse Indicator light will flash. Press and release the desired speed pad.
The pulse function is effective in starting the blending process when you do not want continuous power or when
processing items which do not require an extended amount of blending.
Use the following chart for speed selections.
CLEANING AND CARE
NOTE: • Always clean the blender after using.
• Be sure the blender is unplugged from the outlet before removing parts or cleaning.
• Do not immerse the body, cord or plug in water.
• Be sure to use dish detergent, not cleanser, benzene, thinner, alcohol or a nylon scrubbing brush
because they may cause cracks and rust.
BASE / CONTROL PANEL
Wipe carefully with a cloth dampened
with a mild detergent solution on the
outside of the base.
Wipe again with rinsed cloth and
EXAMPLE OF INGREDIENT / RECIPE
Salad dressings, Mayonnaise
Baby food, Shake
Frozen cocktail, Smoothie
JAR / LID / POUR LID / JAR BASE
BLADE ASSEMBLY / GASKET
Remove the jar from the base. Twist the jar base
off by turning counter-clockwise.
Remove the blade assembly and the gasket.
Wash in mild, sudsy water. Rinse and polish dry.
The jar is also dishwasher-proof.