Rain Harvesting RHLE01 Installation And Specification Manual

PRODUCT DIMENSIONS
RHLE01
274.6
254.15
288.8
DN90 M
FRONT VIEW
RHLE06
274.6
237.8
288.8
DN100 M
FRONT VIEW
ALL DIMENSIONS IN MM UNLESS OTHERWISE STATED.
Pipe Fitment
RHLE01 DN90 M
RHLE06 DN100 M
DISCLAIMER This product specification is not a complete guide to product usage. Product specifications may change without notice. For more
information visit rainharvesting.com.au. Keep this manual handy for future reference. © Rain Harvesting Pty Ltd.
COMPLIANCE
• AS/NZS 4020:2005 Testing of products
for use in contact with drinking water
• enHealth Council
– Guidance on the Use of Rainwater Tanks
– Preventing Mosquitoes Breeding
+61 (0)7 3248 9600
187.8
Wall or Mid Mounting
Wall
Downpipe from the roof
Pipe clip
SIDE VIEW
Cut the downpipe to the same angle
as the Leaf Eater Original Rain Head
Allow 50mm min. gap and screw
Leaf Eater Original to the wall
187.8
Leaf Eater Original Rain Head
Pipe clip
Downpipe to discharge
SIDE VIEW
Fits into 90mm socket
Fits into 100mm socket
• AS/NZS 3500.3:2003 Plumbing and
Drainage – Stormwater Drainage
• HB230:2008 Rainwater Tank Design and
Installation Handbook
• Queensland Health Regulations 1996
(Part 8 – Mosquito Prevention)
rainharvesting.com.au
Leaf Eater Original
Installation and Specification Guide
PRODUCT DETAILS
Keeping leaves, mosquitoes and other insects
out of your downpipes, Leaf Eater™ Original's
dual screen system reduces sources of
contamination to keep your water cleaner and
clearer.
RHLE01 90mm
RHLE06 100mm
FEATURES AND BENEFITS
• Keep leaves and debris out of your pipes
and tank to prevent clogging, blockages,
anaerobic fermentation and tannin
leaching
• Keep mosquitoes, insects and other vermin
out of your Rain Harvesting system
• Reduce the risk of blockages in stormwater
pipes causing eaves flooding