GTemCell GTEM-250 Manual

page 1 of 9
GTEM-250
For emission and immunity testing according to
IEC/EN 61000-4-20
Introduction
The GTEMCELL GTEM-250 is a TEM waveguide with the upper frequency limit extended to the GHz range. It is
under consideration as an alternative measurement facility for both radiated emission and immunity
measurements. It is included in the standard IEC 61000-4-20 "Emission and Immunity Testing in Transverse
Electromagnetic (TEM) Waveguides".
Compared to other measuring methods like EMC test in anechoic chambers or OATS (Open Area Test Sites),
GTEM-cells offer some significant advantages for the testing of small and medium sized EUT´s (Equipment Under
Test) up to a frequency range of 20 GHz. Quick turnarounds of the EUT as well as numerous testing variations are
easy and fast to handle. Switching from emission to immunity testing requires only simple adjustments from
receiver input to amplifier output.
You are irrespective of long waiting times associated with off-site test labs or weather and ambient delays that
can occur at OATS facilities. Whether you are at the design qualification, pre-compliance, compliance, or
production sampling stage, the GTEM is the right choice for you!
GTEM
di E.S. Benites. - 106, Ponte Str. Loc. Ponton 37015 – SANTAMBROGIO DI VALPOLICELLA (VR) ITALY.
Tel. +39 3200470064 , +39 045 7731547, Fax +39 0541 1641013. Mail: gtem.cell@gmail.com,
www.gtem.it, www.gtem.eu, www.gtemcell.com Managing Director: Fiorenzo De Lucia.
Commercial Chamber of Verona Register No: , VAT No.: IT-03969480403
VR-412395