Summary of Contents for Peak MJP-B
- Page 1 SET UP & OPERATION MANUAL Model Number: MJP-B or W For operation, set up and installation videos and additional information, please visit: www.bottleless.com/support XOWater ttleless.com...
- Page 2 Tools You’ll Need Remove screw from Remove screw on side of Peak other side The Peak power cord is 6 You will need a bucket or feet long - so it’s best to trashcan, a Phillips-head Using a Phillips-head locate within 6 feet of...
-
Page 3: Installing The Filter
Installing the filter 1) PUSH IN ON RING TO INTERNAL UNLOCK WATERWAY Filter Head Prep IF ARROW IS FACING Remove filter caps Put zip tie through “WRONG” DIRECTION hole in bracket You will be attaching the Push in on ring around the filter to the back of the water inlet or outlet while If the arrow on the filter head... - Page 4 Installing the filter WATER VALVE IN OFF POSITION 3 Gallons Turn water off Turn water on Flush the filter Push waterway that To turn the water off, turn goes to cooler into Turn water on by rotating Place bucket, trash can or the valve so that it is valve so that it is parallel coffee pot under filter.
- Page 5 Troubleshooting: No Water From Cooler Water is off Remove float kit lid Rotate cooler to if last step didn’t get Press reset button Remove the float kit lid so back & remove lid water flowing: If the backup float is tripped, that you can check it shuts off...
- Page 6 Changing the XO5515 filter Water is off WATERWAY TO COOLER Showing valve in off Look for the arrow Remove Filter Turn the water off position on the back on the filter head Move a trash can or bucket Locate the water shut off under the filter.
Need help?
Do you have a question about the MJP-B and is the answer not in the manual?
Questions and answers