Declaration of Conformity FTX hereby states that all models in the Skyflash range comply with all relevant EC regulations (in par- ticular those stated below) and all of their products are compliant with the said directives.
5- Bear in mind that the Skyflash must be flown at least 2-3 metres from the operator or from any other person that happens to be in the vicinity, to ensure that it cannot hit anybody in the head, face or body.
11. Manual Trim D. BINDING THE REMOTE CONTROLLER WITH THE DRONE 1. Connect your Skyflash’s battery, having first checked that it is correctly charged. If your model has an on/off switch, make sure it is in the ON position. 2. Place your Skyflash on a flat surface.
The right stick controls the forward/backward and left/right movement in both directions. TRIM / REGULATING To ensure that your Skyflash can fly straight and level, you need to trim the aircraft. This can be done either manually or automatically. MANUAL TRIM 5.5.1...
When you hear a continuous “beep” the model will be in fast/acrobatic speed mode. APP CONTROLLER MODE Now you can control your Skyflash from your Smartphone thanks to the new FTX FPV App. This option is available only for versions equipped with WiFi SD/HD camera.
6. Check the Skyflash’s battery charge regularly. If you are not going to use it for a while, ensure that it is charged and never store if after having discharged it.
For this reason, new batteries are always semi-charged. Always dispose of batteries in accordance with local regulations. FLIGHT TIME Your Skyflash’s flight time may vary depending on a range of factors: - The battery charge level. - The speed at which you fly your aircraft.
To perform a Flip & Roll in any of the speeds you can press the right control stick and then move it in any of the four directions to perform a Flip & Roll in this direction. Your Skyflash has a fourth speed with which it is not necessary to press stunts to perform a Flip & Roll manoeuvre.
To replace rotor blades on your FTX Skyflash you must follow the following instructions: Your Skyflash has 4 rotors, 2 of which turn clockwise (A) and the other two anti-clockwise (B). These two types of rotors use blades of opposite types since each of the two pairs of blades is designed to work in a different direction of turn.
- Any additional software that you need to download will be on your own responsibility. CAMERA WIFI SD/HD 6.9.3 To make photos and videos with your WiFi SD/HD camera from the FTX FPV application you must follow these instructions. 1. Download the FTX App.
Charger Camera You can download our control apps by using the QR codes below. Android Android (China) FTX is an exclusive brand of CML Distribution, Saxon House, Saxon Business Park, Hanbury Road, Bromsgrove, Worcestershire, B60 4AD, England info@ftx-rc.com · www.ftx-rc.com...
Need help?
Do you have a question about the Skyflash and is the answer not in the manual?
Questions and answers