B AT TE RY GU I D E
Only use Kaiser Baas official batteries with this
product. To charge the camera:
1. Insert the battery into the camera
2. Connect the USB Charging Cable to the Mini
USB port located on the camera.
3. Connect the USB Charging Cable to a
computer or wall charger.
Warning: If using a wall charger, ensure that
it is a certified product for your region. AC
Input: 100-240VAC 50/60Hz. DC Output: 5VDC
0.5A/1A. Only use a USB charger with suitable
approval and certification. If you do not know
the output voltage/current of the charger use a
computer to charge the battery. Do not charge
in conditions outside of the 10°C-45°C range.
4. The camera status LED will be RED whilst
charging. Once charging is complete the status
LED light will switch OFF.
0 1 - E NG
5. A full charge cycle will take approximately
2.5 hours by 0.5A/1A charger.
Battery Tips
To maximise battery life:
Turn off WiFi.
●
Turn on the Screen Off function.
●
Capture at a lower Video Resolution and
●
frame rate. Higher resolutions and frame
rates impact battery performance.
Avoid exposing the camera and battery to
●
very cold or hot temperatures. Cold or hot
temperatures may temporarily affect the
battery life and cause the camera to stop
working.
Only ever charge the camera with a
●
compliant wall charger marked 5V/1A
BATTE RY GU I DE
Adhere to these guidelines to ensure maximum
performance and longevity.
Never use the camera in water without
●
the waterproof case. The camera is not
waterproof without the case.
If camera has been used in salt water
●
ALWAYS rinse the waterproof case in fresh
water to prevent corrosion.
Regularly check the seals for debris or
●
dust on the door of the waterproof case to
prevent water, sand and dirt ingress.
Never handle the camera, battery or
●
MicroSD Card with wet hands or in wet
conditions.
Clean the camera lens and waterproof
●
case lens with a soft micro fibre towel to
reduce any blurry footage due to grease/
fingerprints.
0 1 - EN G