Advertisement
™
I
R
B
-
3
2
5
I
R
B
-
3
2
5
I
n
f
r
a
r
e
d
P
h
o
t
o
c
e
l
l
I
n
f
r
a
r
e
d
P
h
o
t
o
c
e
l
l
Operating Instructions
This product is an accessory or part of a system. Always read and follow the
manufacturer's instructions for the equipment you are connecting this product to. Comply with
all applicable codes and safety regulations. Failure to do so may result in damage, injury or
death!
Advertisement
Table of Contents
Related Manuals for EMX Industries, Inc. IRB-325
Summary of Contents for EMX Industries, Inc. IRB-325
-
Page 1: Operating Instructions
™ Operating Instructions This product is an accessory or part of a system. Always read and follow the manufacturer’s instructions for the equipment you are connecting this product to. Comply with all applicable codes and safety regulations. Failure to do so may result in damage, injury or death! - Page 2 IRB-325 Instructions Document no. REV 1.0 Date 10/25/2007...
-
Page 3: Product Overview
B1 non-contact sensor for use with automatic gate and door openers. The IRB-325 transmitter and receiver have a line of site range of up to 65 feet. The IRB-325 operates on 12 VDC to 24 VAC and draw 150 mA maximum. - Page 4 10. The IRB-325 is housed in a NEMA 4X enclosure. To insure the integrity of the enclosure make sure the covers are attached and closed tight with the help of four plastic screws provided.
- Page 5 Type B1 sensor to the operator. 3. Disable the gate so it is unable to move. 4. With the IRB-325 mounted in place and powered, make sure the transmitter “TX” is in line of sight of the receiver “RX”.
-
Page 6: Trouble Shooting Guide
Receiver activates but does not Faulty connection between Check wires and terminal transmit signal to operator receiver and operator control connections to make sure they input are good IRB-325 Instructions Document no. REV 1.0 Date 10/25/2007... -
Page 7: Ordering Information
Set of 2 powder coated steel protective hoods required for UL-325 IRB-325-PT Mounting post 2 in x 2 in x 2 ft black powder coat IRB-325-SP Watertight strain relief for use with interconnection cords. IRB-325-SP IRB-325-PT IRB-325 Instructions Document no. REV 1.0 Date 10/25/2007... - Page 8 4564 Johnston Parkway Cleveland, Ohio 44128 United States of America http://www.emxinc.com E-mail salessupport@emxinc.com Telephone (216) 518-9888 Fax (216) 518-9884 IRB-325 Instructions Document no. REV 1.0 Date 10/25/2007...
Need help?
Do you have a question about the IRB-325 and is the answer not in the manual?
Questions and answers