Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Intelligent Home DT-GSM
-
Page 1: User Manual
DT-GSM GSM Interface 2-wire series User Manual www.intelligenthomeonline.com... - Page 2 About GSM Interface The GSM Interface is designed for 2-wire series video door entry systems. Enables to divert calls from Door Station to a land line telephone or a mobile via Mobile Network. Requires activated SIM card with credit on it Features: • Maximum 3 telephone numbers can be programmed...
- Page 3 Configuration: BUTTON Network Reset Signal Power Quality Status Transfer Recover REV LED indicator Description -LED off - GSM not working Power -LED flashes rapidly - system error -Steady on - GSM works normally -LED off - SIM card is not detected -LED flashes slowly - SIM card is detected but not registered Network -LED flashes rapidly - SIM card is detected and registered successfully, but initialization was unsuccessful...
- Page 4 Button Descriptions - Press ‘Reset’ button, to reset GSM Reset - Press ‘Signal Quality’ button, to check the signal strength Signal Quality Recover - Button reserved - Button reserved Signal strength Check: Press ‘Signal Quality’ button No signal: 4 LEDs are off Bad signal: only the Power LED is on Weak signal: Power &...
- Page 5 3. DIP Switches Settings for GSM Interface DIP State Description DIP1-DIP5 Reserve d 3 4 5 Set ‘O n ’ for A partment s system 3 4 5 DIP6 Set ‘O ff ’ for House system (default) 3 4 5 One GSM Interface needed for either house or Apartments systems 4.Telephone Number Programming on Video Monitor Touch ‘Call Divert’...
- Page 6 Divert Modes There are 3 types of divert modes: • 1 - Do not divert calls. Calls from the door station wan’t be diverted • 2 - Divert if not answered. If video monitor was not answered the call within 25 seconds, the call will be diverted to the telephone number you set.
-
Page 7: Specifications
6.Wiring Antenna ID=00 7.Specifications Power input: DC 20~28Vdc (supplied by power supply) Power Consumption: Standby:60mA;working:500mA Working temperature: -10ºC +40ºC Wiring: 2-wire, No-polarity Dimension: 90(H)X72(W)X60(D)mm... - Page 8 The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved www.intelligenthomeonline.com...
Need help?
Do you have a question about the DT-GSM and is the answer not in the manual?
Questions and answers