Firmware Upgrade Via Usb Stick; The Shell Script Screen - ZyXEL Communications ZyWall ATP series User Manual

Figure 533 Firmware Upload Error

39.3.3 Firmware Upgrade via USB Stick

In addition to uploading firmware via the web configurator or console port (see the CLI Reference
Guide), you can also upload firmware directly from a USB stick connected to the Zyxel Device.
Create a folder on the USB stick called '/[ProductName_dir]/firmware'. For example, if your Zyxel Device
1
is USG110, then create a '/usg110_dir/firmware/' folder on the stick.
Put one firmware 'bin' file into the firmware folder. Make sure the firmware ID and version number are
2
correct for your model (the firmware ID is in brackets after the firmware version number - for USG100 it is
AAPH).
Note: Do not put more than one firmware 'bin' file into the firmware folder.
The firmware version in the USB stick must be different to the currently running firmware.
If the firmware on the USB stick is older, then the Zyxel Device will 'upgrade' to the older
version. It is recommended that the firmware on the USB stick be the latest firmware
version.
Insert the USB stick into the Zyxel Device. The firmware uploads to the standby system space.
3
The SYS LED blinks when the Zyxel Device automatically reboots making the upgraded firmware in
4
standby become the running firmware.
Note: If the startup-config.conf configuration file has problems and you are upgrading to 4.25
or later firmware, then the Zyxel Device will revert (failover) to the previously running
firmware.
If the startup-config.conf configuration file has problems and you are upgrading to
earlier than 4.25 firmware, then the Zyxel Device uses the new earlier firmware, but
generates a log and tries the existing lastgood.conf configuration file. If there isn't a
lastgood.conf configuration file or it also has an error, the Zyxel Device applies the
system-default.conf configuration file.

39.4 The Shell Script Screen

Use shell script files to have the Zyxel Device execute commands that you specify. Use a text editor to
create the shell script files. They must use a ".zysh" filename extension.
Click Maintenance > File Manager > Shell Script to open the Shell Script screen. Use the Shell Script
screen to store, name, download, upload and run shell script files. You can store multiple shell script files
on the Zyxel Device at the same time.
Chapter 39 File Manager
ZyWALL ATP Series User's Guide
774