Nurit 8000 User Quick Reference Manual

05BAM066_N8000.Rest.B.1.Doc
Manual Credit Card Sale
›
Enter Acct Number +
›
Enter
Exp. Date +
Paymt
›
Enter
Amount +
Paymt
›
››
Enter Tip Amount +
›
Enter Server Number +
Card Present?
›
Enter
Press for Yes
Paymt
›
Or Menu for No
Cancel
›
Enter
Enter Zip Code +
Paymt
›
Enter
Street Address +
Paymt
›
Enter CVV2, CVC2, or CID
Enter
Code* +
Paymt
If code is not known or not present, press
and choose the appropriate numeric response.
›
Enter Order Number* +
Enter invoice number or just press the
Enter
and then press the key.
Paymt
*These items above prompt if the card is not present. Discover
cards will prompt when the card is present as well. The AVS
and CVV2 or CID response will print on the receipt.
NOTE:
The Nurit 8000 is a wireless terminal with an internal radio antenna and battery pack. The terminal will turn itself off if idle for more
than one minute to conserve the battery power. To turn the terminal back on, press and hold down
the battery, plug the terminal into a standard power outlet using the power pack provided. It is recommended that the terminal be
charged for 12 hours upon receipt, and about two hours for recharges.
To manually turn the terminal off, press
There is a battery status graphic in the lower left corner of the screen. A radio connection and signal strength indicator is in the
lower right corner. When first powered on, this will say "RAD FAIL." After a radio connection is made (5-40 seconds) a number
should display here to indicate the strength of the connection. A signal of at least 14 is recommended.
-
Tip Prompt: To have tip prompt during the transaction, press the
(Tip Options). Enter password then press
In Transaction". Press 2 then
Tips" on this card.
-
Batches should not exceed 400 transactions.
* CVV2 (also CVC2 and CID) codes are often requested for manually entered transactions. These codes normally appear on the
back of the card as the last three digits on the right of the signature panel, directly below the mag stripe.
››
Optional Prompts Include: Tip Amount, Invoice Number, Table Number, Number of Guests, Zip Code and Street Address on Manual
Entries (use numbers only for street address).
Use numbers only for street address.
4/18/05 3:07 PM
Nurit 8000
Quick Reference Guide
Credit Card Sale
›
Enter Swipe Card
Paymt
›
Press for Credit Card if
Menu
Cancel
Prompted, or Skip to Next Step
›
Enter
Amount +
Paymt
Enter
Paymt
›
Enter Tip Amount
Enter
Paymt
›
Enter Server Number +
Credit Card Refund
›
Press
Until Credit...Return
Appears on the Screen
›
Swipe Card
Or Enter Acct Number +
›
Enter
Exp. Date +
Paymt
Enter
Paymt
›
Amount + Enter
Paymt
Enter
Paymt
›
Enter Server Number +
key
1
and at the same time.
On/Off
F
Menu
Cancel
Enter key, press 1 (Tip 1=ON), or 2 (For ON). Press
Paymt
Enter
key, then press Menu key four times to return to idle prompt. Tip can still be adjusted later. See "Add
Paymt
Cancel
Page 1
R
ESTAURANT

Debit Sale

›
Swipe Card
›
Enter
Press
Paymt
Or
›
Enter
Press
Paymt
Until Debit...Sale Appears on
››
Enter
+
the Screen Then Swipe Card
Paymt
›
Amount +
Enter
Paymt
›
Enter Tip Amount
›
Cash Back +
›
Enter
Press
Paymt
›
Enter Server Number +
›
PIN Number +
Enter
Paymt
›
Press
Until Credit...Void/Sale
Enter
Paymt
Appears on the Screen
Press again to VOID a Return, or again
to VOID a Forced Sale.
›
Swipe Card
Or Enter Acct Number +
›
Exp. Date +
›
Amount +
›
Enter Server Number +
The terminal will look for a transaction that matches the data
entered to VOID, or it will read "Trans not found" if no match.
for two seconds. To charge
On/Off
key, then select 5 (System Options), 6 (Working Mode), then 1
Enter
key until display says "Tip 1 Options - 2
Paymt
for Debit Card
Enter
Paymt
››
+ Enter
Paymt
Enter
Paymt
if No Cashback
Enter
Paymt
Enter
Paymt
Voids
Enter
Paymt
Enter
Paymt
Enter
Paymt
Enter
Paymt