Download Print this page

1TAC Roadside Safety Disc User Manual page 2

Advertisement

The Roadside Safety Disc has 15 Ultra Bright LED's and can
be seen from over 5,000 feet!
Roadside Safety Disc Features:
Lamp Life - Over 1,000 hours
Run Time - 13 hours
LED Emitters - 9 unique flashing modes
Multi-use - Magnet base
Durability - Waterproof and floats
Range of Use:
A safe and ecologically friendly emergency road flare. NO
spark, open flame, fumes, or toxic chemicals are produced
when using the Safety Disc
• Shock resistant construction makes the Safety Disc durable
and able to withstand potential impact
• The Safety Disc can be used lying flat, on its side, or
hanging. It has a magnet for metal applications. It is also
waterproof, so it may be used in marine applications
submerged up to 33 feet. If not attached by magnet, the
Safety Disc will float
To Operate Roadside Safety Disc:
Press the ON/OFF button to rotate through the following 6 light
patterns:
LIGHT SEQUENCES
1. Double Pulse
2. Single Pulse
3. Short Single Pulse
4. Rotating Beacon
5. Alternating Flash
6. SOS
7. Steady Full Beam
8. Steady Low Beam
9. White LED Work Light (
10. Off
ALTERNATE OPERATION:
To turn the Safety Disc off without cycling through the 6 light
patterns, press and hold the ON/OFF button for 2 seconds.
Battery Replacement: (3*AAA Batteries)
1. Unscrew the two screws completely on the bottom of the unit.
2. Place the screwdriver under one of the plastic tabs and twist
to open the cover.
3. Lift the cover to reveal the battery compartment.
4. Insert/Replace AAA batteries into the battery retainer.
Replace cover and screws.
Customer Support:
To reach our customer support staff Monday through Friday 8am
- 4pm PST, email
support@1tac.com
press option 2.
RUN TIME
15 Hours
15 Hours
100 Hours
15 Hours
24 Hours
8 Hours
10 Hours
15 Hours
) 10 Hours
short double click
or call 877-616-3515,
5.

Advertisement

loading