Jindara Kimberley Mk3 Freestanding Operation & Installation Instructions

Advertisement

Quick Links

Kimberley Mk3 Freestanding
1. Subject to clauses 2 & 3 of this Warranty, A.F. Gason Pty Ltd ACN 004 667 556 (Gason warrants the follow components of its heaters against defects in workmanship
and/or materials for the following periods from the date of purchase:
a) the rebox for ten years;
b) the paint nish for a period of twelve months if the Purchaser has followed the instructions provided by Gason in the Operation and Installation Instructions manual; and
c) all other components for twelve months execpt the glass, re brick lining or ba e plate if, in the opinion of Gason, these items have been damaged by impact.
2. This extended warranty does not apply;
a) if the heater is purchased from a person who has not been authorised by Gason to sell its products;
b) if, in the opinion of Gason, the heater or any other component has been subject to abuse, misuse, alteration, modi cation or has not been installed, operated or maintained in
accordance with the instructions provided by Gason; or,
c) to owners other then the original Purchaser.
3. If you believe that the heater you purchased contains a manufacturing de fect and you wish to make a claim under this Warranty, please contact an authorised Gason service
centre to arrange for an assessment.
4. If, after assessing the heater, Gason determines that the heater contains a manufacturing fault, Gason may at its discretion:
a) replace the heater;
b) repair or replace speci c components of the heater; or
c) provide a full refund.
5. Parts replaced under warranty are warranted for the balance of their original warranty period.
6. If, at the discretion of Gason, the heater or any part needs to be replaced, serviced or repaired at an authorised Gason service centre, then the person claiming under this
Warranty must pay all costs associated with:
a) returning the heater; and
b) the delivery or collection of any new or repaired heater.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Any bene ts you receive under these warranties are in addition to other rights and remedies that you may have as a consumer under a law in relation to the heater to which
these warranties relate.
These warranties are given by:
A.F. Gason Pty. Ltd.
Blake Street
Ararat VIC 3377
Please contact us if you have any queries on:
Phone: 03 53522151
or email us via the "Contact Us" section of our website: www.gason.com.au

WARRANTY

12
Kimberley Mk3 Freestanding
Operation & Installation Instructions
Rev*
Please keep these instructions for future reference.
Heating
A division of A.F. Gason Pty. Ltd.
231537

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Kimberley Mk3 Freestanding and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Jindara Kimberley Mk3 Freestanding

  • Page 1 Kimberley Mk3 Freestanding Heating A division of A.F. Gason Pty. Ltd. WARRANTY 1. Subject to clauses 2 & 3 of this Warranty, A.F. Gason Pty Ltd ACN 004 667 556 (Gason warrants the follow components of its heaters against defects in workmanship and/or materials for the following periods from the date of purchase: a) the rebox for ten years;...
  • Page 2 Kimberley Mk3 Freestanding Kimberley Mk3 Freestanding Troubleshooting (Continued) Read and follow these instructions carefully before installing and WARNING using this appliance SAVE THESE INSTRUCTIONS • A ue re with resulting damage may occur if the appliance is not installed, WARNING operated and maintained as per this booklet.
  • Page 3 Hearth Requirements If the Jindara Kimberley will be installed onto a non-combustible oor such as a brick, stone or a concrete slab with tiles etc. which are at least 9mm thick, and extends at least 300mm in front of the appliance base, a hearth or oor protector may not be required.
  • Page 4: Troubleshooting

    Undo the holding nut and pull the switch out. Disconnect the wiring from the power lead and remove the fan and switch. Convey the same to the authorised Jindara dealer from whom you purchased your unit for service.
  • Page 5 Pull the brush back out and repeat the process. Each time you do this you will notice that the brush will go further The performance of your Jindara Kimberley is highly reliant on an e ective ue system. In many cases poor start- down the chimney till it reaches the bottom.
  • Page 6 Kimberley Mk3 Freestanding Kimberley Mk3 Freestanding Installation Operating your Jindara woodheater (continued) Flue and chimney requirements DO NOT ATTEMPT TO OPERATE THIS APPLIANCE WITHOUT READING AND pipe shall extend not less than 4.6m above the top of the protector. Note: Installation must be WARNING UNDERSTANDING THESE OPERATING INSTRUCTIONS THOROUGHLY.

Table of Contents