National Instruments VXI-MXI-Express Series User Manual page 12

Chapter 1 Introduction
VXI-MXI-Express Series User Manual
The NI VXI-8360LT allows the extension of the 8 TTL backplane triggers
to two M-LVDS front panel trigger bus connectors that are mechanically
and electrically compatible with the LXI-wired trigger bus specification
when configured in a specific way. Refer to Appendix D,
Ports on the NI VXI-8360LT, for more information about using the trigger
bus ports on the NI VXI-8360T.
Kits that include a MXI-Express interface board also include a 3 m
MXI-Express x1 cable. 1 m and 7 m cables are also available and can be
purchased separately.
The kits also include the NI-VXI/NI-VISA CD, which installs the
VXI device drivers, NI-VISA, MAX, Resman, and other useful utilities.
This software also enables additional features of the NI VXI-8360T/LT,
such as Variable Power On (VPO) support, that are not covered in this
manual. Refer to the respective software release notes for more
information.
1-2
Using the Trigger
ni.com