Table of Contents
Advertisement
Linear Acoustic UPMAX v4 User Guide
•
Analog Monitor Outputs: A +4dBu balanced analog version of outputs 1-8. Volume
can be controlled from the front panel joystick encoder or via the Remote port.
2.4
Quick Setup Notes
The Linear Acoustic UPMAX v4 is configured at the factory and is ready to go on the air
after making the proper input and output connections and determining if upmixing is de-
sired.
•
Apply a two-channel (stereo or LtRt) signal to Main Input 1/2
•
The main menu will default to showing output meters, and you should see activity on
some or all of the first six meters.
•
Upmixed audio will be output from the Main Out 1-6 AES outputs in the following
format: 1/2 = Left Front/Right Front, 3/4 = Center/LFE, 5/6 = Left Surround/
Right Surround
•
You will also have audio on the analog outputs in the same format as above.
The best way to learn the processor is to explore the different settings with audio applied
and monitored. There are several factory presets to support many different tastes. Some
presets may not sound much different at first, but will perform very depending on program
content. When in doubt, try turning the upmixing process off or as a last resort use the
Master Bypass feature which will remove the UPMAX v4 completely from the signal path.
Connections and Quick Setup
11
Advertisement
Table of Contents
