Elecrow CrowPi All-in-One Kit Quick Start Manual page 19

What should you do next?
Now, when the initial installation is complete - you're ready to go!
We've prepared 21 lessons for you to get started with the CrowPi.
The lessons will get you started using Python 2.7 and modules usages including all
on-board sensors and creating your own first circuit using the breadboard.
Download the lessons PDF Here:
https://www.elecrow.com/download/CrowPi-lessons.pdf
Lesson 1 - Using the Buzzer for alert sound or notification.
Lesson 2 - Get input from button to control the Buzzer.
Lesson 3 - How Relay works and how to control it.
Lesson 4 - Send vibration signal to the vibration sensor.
Lesson 5 - Detect sound using the sound sensor.
Lesson 6 - Detect low or bright light using the Light sensor.
Lesson 7 - Detect room temperature and humidity using the DHT11 sensor.
Lesson 8 - Detect motion using the motion sensor.
Lesson 9 - Getting distance information using the Ultrasonic sensor.
Lesson 10 - Controlling the LCD Display.
Lesson 11 - Read / Write RFID card using the RFID module.
Lesson 12 - Using the step motor and making step movements.
Lesson 13 - Controlling servos motors using the servo interfaces.
Lesson 14 - Controlling the 8x8 Matrix LED.
Lesson 15 - Controlling the 7 Segment Display.
Lesson 16 - Detecting touch using the Touch Sensor.
Lesson 17 - Detecting tilt using the Tilt Sensor.
Lesson 18 - Using and controlling the Button Matrix.
Lesson 19 - Using and controlling the IR sensor
Lesson 20 - Making your own circuit board using the Bread Board
Lesson 21 - Using the CrowPi Camera
If you encounter any issues or have any question regarding the CrowPi, don't hesitate
to ask, we are always here for you.
Summary
info@elecrow.com
17