Download Print this page

Eureka Ruby Operation & Installation Instructions

Advertisement

Quick Links

Ruby Module
Removing heater from pallet:
• Remove x1 tek screws from rear of pedestal base.
• Remove x2 tek screws from transport tabs located each side of the appliance.
• Remove transport tabs via Phillips Head screws underneath the base of the appliance.
O/All weight: 220kg
Package dimensions: 930Hx1035Wx630D
750
To aid heater installation, remove door, top plate, ba e system and cast iron liners
Top Plate
to reduce overall heater weight.
720
1. Subject to clauses 2 & 3 of this warranty, A.F. Gason Pty Ltd ACN 004 667 556 warrants the following components of its heaters against defects in workmanship
and/or materials for the following periods from the date of purchase:
a) the rebox for ten years;
b) the paint nish for a period of 12 months if the purchaser has followed the instructions provided by Gason in the operation and Installation Instructions manual; and
c) all other components for 12 months except the glass, re brick lining or ba e plate if, in the opinion of Gason, these items have been damaged by impact.
2. This extended warranty does not apply;
a) if the heater is purchased from a person who has not been authorised by Gason to sell its products;
b) if, in the opinion of Gason, the heater or any other component has been subject to abuse, misuse, alteration, modi cation or has not been installed, operated or maintained in
accordance with the instructions provided by Gason; or,
c) to owners other than the original purchaser.
3. If you believe that the heater you purchased contains a manufacturing defect and you wish to make a claim under this warranty, please contact an authorised Gason service
centre to arrange for an assessment.
4. If, after assessing the heater, Gason determines that the heater contains a manufacturing fault, Gason may at its discretion:
a) replace the heater;
b) repair or replace speci c components of the heater; or
c) provide a full refund.
5. Parts replaced under warranty are warranted for the balance of their original warranty period.
6. If, at the discretion of Gason, the heater or any part needs to be replaced, serviced or repaired at an authorised Gason service centre, then the person claiming under this
warranty must pay all costs associated with:
a) returning the heater; and
b) the delivery or collection of any new or repaired heater.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Any bene ts you receive under these warranties are in addition to other rights and remedies that you may have as a consumer under law in relation to the heater to which
these warranties relate.
These warranties are given by:
AF Gason Pty Ltd
Blake Street
Ararat VIC 3377
Please contact us if you have any queries on:
Phone: 03 53522151
or email us via the "Contact Us" section of our website: www.gason.com.au
AF Gason Pty. Ltd. reserves the right to modify or alter speci cations, material, etc. in the interest of product improvement.
205
548
WARRANTY
16
240
Operation & Installation Instructions
Rev C
Please keep these instructions for future reference.
Ruby Module
232351

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ruby and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Eureka Ruby

  • Page 1 Ruby Module Removing heater from pallet: • Remove x1 tek screws from rear of pedestal base. • Remove x2 tek screws from transport tabs located each side of the appliance. • Remove transport tabs via Phillips Head screws underneath the base of the appliance.
  • Page 2: Troubleshooting

    A wood’s e ciency does not depend only on its type, but also on its moisture content as well as the temperature of the appliance. combustion chamber. To achieve a greater e ciency and longer burn cycle out of your Eureka Ruby, without the emissions •...
  • Page 3: Installation

    If any burrs have developed on the back of the As per the dimensions in Figure 1 & 2 the Eureka Ruby can be installed with a Perforated 6” Default Flue Kit including a air slide or on the face of the heater, rub them o with ne wet and dry sand paper till you have a smooth surface and 180 degree x 900mm ue shield, or Figure 3 &...
  • Page 4 Ruby Module Ruby Module Installation Basic Spare Parts (Continued) Parallel Installation - Perforated Outer Flue Kit - 6” Active Flue with an 8” Perforated painted Outer Flue casing, which Figure 1 extends from the top of the heater to the drop box at the ceiling level, and an additional 180 degree x 900mm heatshield in between the active ue and outer casing (supplied with heater).
  • Page 5 Ruby Module Ruby Module Installation Maintaining & Servicing your Eureka (Continued) (Continued) Parallel Installation - Solid Outer Flue Kit Ensure all maintenance is carried out when appliance is cool. - 6” Active Flue with an 8” Solid painted Outer Flue casing, which...
  • Page 6 To maintain an e cient and safe use of your Eureka Ruby, you may need to adjust installation to conform to AS/NZS 2918:2001.
  • Page 7 • Ensure the baffle is firmly located and in the correct orientation. ue brush from your local Eureka Dealer and proceed up onto the roof. Remove the cowl. Slowly push the brush down • Ensure cast iron liners - side and back - are positioned correctly.
  • Page 8 Fan operation or less Your Eureka Ruby is equipped with a temperature-sensitive thermostat switch located within the heaters pedestal beneath 600mm min the rebox, which when selected will turn the fan on and o depending on the temperature of the rebox.