Wireless IP Camera ZXHN HS320 V2.0User’s Guide 1 Safety Instructions Using an authorized or incompatible power adapter may causefires, explosions or other dangers. This product and its fittings include some small parts. Pleasekeep the product and fittings out of children’s reach to preventchildren from damaging them, swallowing small parts, or beingotherwise injured.
Page 2
2 Interfaces Wlan Operation Frequency: 2412~2472MHz, EIRP Power (Max.): 15±3dbm. Interface Function MicroSD slot Insert a TF card into the slot to store local videos. MicroUSB power Connect a power adapter or power bank to the interface. interface Mode button Switch between function modes.
Page 3
3 Preparing to Use the Camera Power on the camera. The LED turns on. For the ZTE IP camera to perform its functions, it has to be connected to a wireless router whose routing feature is enabled. Make sure that the camera is within range of the wireless router.
Tips: You can also visit http://www.ztehome.com.cn/homecareapp from your smartphone to download the app. Register on the app as a new user. 5 Adding the Camera Wait until the LED starts to slowly flash in blue. If the LED does not start to slowly flash in blue, restore the factory settings of the camera by pressing and holding the Reset button until the LED turns red.
7 CE Statement Hereby, ZTE Corporation declares that the radio equipment type ZXHN HS320 V2.0 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is http://support.zte.com.cn/support/cer/GU. available at the following internet address: 8 FCC Statement...
Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 9 Safety Guidelines 1. Read these instructions. 2. Clean only with dry cloth. 3. This camera is for indoor use only. 4.