Quick Start Guide - Bignay Gi Fly Owner's Manual

1

Quick start guide

Unpacking the box.
1 |
Remove the small boxes within the large
box. The smaller boxes contain the bike's
charger, pedals, cellphone holder, reflec-
tors, as well as the tools for assembly.
2 |
Remove the seat and seatpost, the rear
mudguard, and rear light from the box.
These parts will arrive unattached to the
bike. We will assemble them shortly (see
image A).
3 |
Remove the bike and handlebars from the
box. The handlebars will be attached to the
folded bike by wires. For this reason, it is
important to take the bike out by grabbing
onto the wheels and frame of the bike. Do
not pull any of the wires in an attempt to
take out the bike (see image B).
4 |
Lay the bike on the ground on its side, in the
same position that the bike was in while in
the box. We will assemble the handlebars
onto the bike shortly (see image C).
6
Read these instructions carefully or use the following link
to watch a demonstration:
http://giflybike.com/videos/quickstart-gifly.mp4
A
B
C