Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Theralux Water Management System
- Page 1 Water Management System Advanced User Manual...
- Page 2 Advanced Settings (ADVANCED) Menu ADVANCED MENU is accessed by holding the OFF button for approximately 4 seconds and then press the ENT button. Advanced Settings comprise: Chlor Dose Pump ON/OFF (depends on unit type and ORP menu settings) POOL –...
- Page 3 Filter Cycles (FILTER CYCLES) Menu From the ADVANCED SETTINGS MENU, use the Y/UP button to scroll up to the FILTER CYCLES Sub-MENU and select by pressing ENT. The Factory Settings have two of a possible four Filter Cycles enabled. The LCD will display the number of enabled Filter Cycles in the lower right hand corner. This number can be adjusted using the Y/UP or N/DOWN buttons, followed by the ENT button to save changes.
- Page 4 Adjustment of these settings can result in incorrect operation for the pool size and alteration should not be attempted unless advised by Theralux Advanced Mineral Pool Systems. Dis/Enable Shutdowns Turns any protective shutdowns on/off.
Need help?
Do you have a question about the Water Management System and is the answer not in the manual?
Questions and answers