Download Print this page

SoundEar SoundBuster Instruction Leaflet

Download this manual

2.1 m. 24V AC adapter cable

and plug, connect to left side of Sound-

Buster and then to power socket.

ound

The relay, that when used together with SoundEarII,

can be used to control any hi-fi systems, lights etc.

connected to it.

SoundBuster can either disconnect or connect the power

supply when the preset noise limit on the SoundEar II

is exceeded.

Remember to specify which you need when ordering.

3 m. alarm cable

for connecting SoundBuster to

SoundEar. Follow manual for

SoundEar II.

uster

220 V

power supply cable

and plug, connect to right

side of SoundBuster and

then to power socket.

Device plug

with power strip

for connecting the devices to be

controlled by SoundBuster.

Instructions Leaflet for SoundBuster page 1

Need help?

Do you have a question about the SoundBuster and is the answer not in the manual?

Page 1 SoundBuster can either disconnect or connect the power supply when the preset noise limit on the SoundEar II is exceeded. Remember to specify which you need when ordering.
Page 2 1. The Green LED lights up when the SoundBuster is switched on and the SoundEar’s noise limit have to be exceeded (red ear) before the SoundBuster reacts. alarm cable is connected to a Sound- Use this dial to select reset time, i.e. how long before Ear that is also switched on, and the noise level is not exceeded.
Page 3 For professionals / Electrical diagram Cable for external control Relay Cable entry Can be used for relay or switch (pilot current max. 10A) Mounting box Instructions Leaflet for SoundBuster page 3 www.soundear.com...