Page 1
Section 1 Introduction 1.1 Overview ARS-2160H/ARS-2320S is a SCSI-to-SATA II bridge. Through its connection to a SCSI host SCA2 80-pin connector the bridge can turn a 2.5'' hard drive into one with LVD SCSI efficiency. Thus, you can enjoy the high performance of SCSI.
Page 2
2. Slide the 2.5'' SATA hard drive along the sides of ARS-2160H till it connects CN16. 3. Fix the SATA hard drive to the two sides of ARS-2160H with the enclosed 4 screws. 4. Return the upper cover of the bridge and fix with the 4 screws.