Advertisement
Turn off Siri or other Voice
assistant
4.2. Pairing to a Mobile Phone or Other Device
To pair your SoulSound 2 headphones with a phone or a computer, please follow the steps below.
Once your device is paired to a specific device they will remain paired and will automatically
recognize each other whenever they are within range and Bluetooth is switched on.
Steps for pairing to a Bluetooth-enabled device
1. Turn on your device and activate the Bluetooth mode.
2. Turn on the Paww SoulSound 2 headphones and enter Pairing Mode by pressing the
"MFB" button for 3 seconds.
3. On your Bluetooth-enabled device, scan or search for new devices. Please refer to the
device's user guide for more information on how to do this.
4. Select SoulSound 2 from the list of new devices available.
5. If asked for a Pass Key or PIN, enter 0000.
6. If asked to confirm the pairing, press Yes.
4.3. Connecting to Two Devices Simultaneously
1. Pair the PureSound headphones to your first device using the steps described in section
4.2.
2. Once paired successfully, turn the headphones and Bluetooth function on the first
device off.
3. Turn on the headphones.
4. Now pair the headphones to your second device using the steps described in section
4.2.
5. Once pairing is successful with the second device, turn Bluetooth on in the first device.
6. Click "SoulSound 2" on the first device, now two devices are connected to the same
headphones.
Note:
1. When reconnecting, the headphones will automatically connect to one of the two devices
automatically. To connect the second device, you will have to go to Bluetooth settings and
select SoulSound 2 from the list of available devices.
2. To switch sources when listening to music, press pause on the device playing the music,
and press play on the second device. There may be a few second gap before the switchover
happens.
4.3. Charging your device
A USB cable is needed to charge the headset and a 5V output DC adapter. Before using the
device, make sure to charge for at least 6 hours prior to initial use. When charging, the LED
indicator will show a solid red light. When the device is fully charged, the LED indicator turns to
blue. Headphones will automatically turn off when charging.
Double press the "MFB" button to turn off Siri or other Voice assistant.
Advertisement
