Core SWX HyperCore 98R Instruction Manual page 2

Thank you for your choice in purchasing a Core SWX Lithium Ion
Battery Pack. The battery is designed to improve and assist you in your
mobile powering requirements. Please read this manual to help you
understand and capitalize on the features of this battery.
Features:
Intellicom RunTime LCD
•
• Fuel Computer communicates % data to RED Cameras
• On-Board Microprocessor stores: Name, Serial Number, Voltage,
Temperature, Current, Chemistry Type, Charge Cycles, and
Date of Manufacturing. When used with a Switronix digital
charger, this information can be displayed.
• The Viewfinder Capacity Display communicates with the camera
to display your remaining battery capacity in your camera's
viewfinder.
*(select camera models)
• Four Stage, accurate, LED power gauge.
• No memory effect.
• Temperature, current, and voltage protection.
• NEW DuraCase provides a shock absorbing, non-slip shell to
protect the battery pack.
• Incorporated 2-pin powertap provides unregulated power, as
well as a 5v USB.
Charging the Battery:
Core SWX HC batteries were designed to be used Core SWX
•
chargers. Any other charger may damage the battery and/or
the charger. Please contact us before using other chargers.
Core SWX batteries can be recharged in any charge condition.
•
• Charge the battery in ambient temperature range of between
o
o
0 C ~ 45 C. For best results, charge in an environment between
o o
10 C ~ 30 C. Charging in any other conditions will not allow the
battery to reach maximum charge capacity.
Discharging the battery:
• Maximum continous discharge for the is 10A(120W) for the
HC98R.
• The 2-pin connector can be used to simultaneouly power a
camera and a 12vdc accessory. However, prior to using this
option combine the total draw of the camera and accessory to
make sure you are not drawing more than the recommended
discharge amount.
Intellicom RunTime LCD:
• The LCD automatically switches between 3 different phases;
Normal RT(based on default 30wh draw), Remaining RT(based
on actual draw, when in use), and Remaining Charge Time(when
connected to a charger).
• Press and hold the "Light" button for 1-2 seconds to activate the
backlight feature.
• During operation, the battery samples the current entering or
exiting the battery in 7 second intervals. During the charging
process, the charge current fluctuates, causing the Charge Time
readings to vary.
Power Gauge LEDs:
Remaining LED1
0% Off
less than 10% Blinking
10-25% On
26-50% On
51-75% On
76-100% On
The RunTime LCD and power gauge's accuracy is dependent upon a
full charge and discharge. At least once every 2 months the battery
should be fully discharged and charged so the battery can relearn
the capacity of the battery.
Storage:
• Store the battery 25% charged in an environment between
o o
10 C ~ 30 C. Every 2 months the battery should be
charged due to minimal self-discharge.
Notes On Use:
• An increase in temperature is normal during charging and
discharging.
• Make sure to keep battery contacts clean.
• Do not attempt to disassemble the battery. Please contact
Switronix for any service issues.
• Keep batteries seperated when transporting.
• Keep battery pack dry and avoid use in humid environments.
LED2 LED3 LED4
Off Off Off
Off Off Off
Off Off Off
On Off Off
On On Off
On On On