LG MU-40PA15 Owner's Manual page 22

07. Contrast (Command:g)
G To adjust screen contrast.
You can also adjust contrast in the Video menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to 'Real data mapping1'.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
Data Min : 00 ~ Max : 64
08. Brightness (Command:h)
G To adjust screen brightness.
You can also adjust brightness in the Video menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to 'Real data mapping1' as shown below.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
Data Min : 00 ~ Max : 64
09. Color (Command:i)
G To adjust the screen color.
You can also adjust color in the Video menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to 'Real data mapping1' as shown below.
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data Min : 00 ~ Max : 64
10. Tint (Command:j)
G To adjust the screen tint.
You can also adjust tint in the Video menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red : 00 ~ Green : 64
* Refer to 'Real data mapping1' as shown right.
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data Red : 00 ~ Green : 64
22
11. Sharpness (Command:k)
G To adjust the screen sharpness.
You can also adjust sharpness in the Video menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to 'Real data mapping1' as shown below.
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data Min : 00 ~ Max : 64
12. OSD select (Command:l)
G To select OSD (On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0 : OSD off
1 : OSD on
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data 0 : OSD off
1 : OSD on
13. remote control lock mode (Command:m)
G To lock the front panel controls on the monitor and
remote control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0 : off
1 : on
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 0 : off
1 : on
* In not use the remote control, you can set this mode.
* Real data mapping 1
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
64 : Step 100
* Real data mapping 2
0 : -10
5 : -9
A : -8
2D: -1
32: 0
37: +1
5F: +9
64: +10