Highway The Wizard Manual

Work zone alert and information radio

Hide thumbs

Table of Contents

Quick Links

Download this manual

Enlarged version

RF Safety Warning

The antenna for this device must be mounted on top of the

roof of the vehicle or on top of the construction site trailer

away from nearby personnel. All personnel must remain at

least 7" from an unobstructed antenna to avoid extended peri-

ods of RF exposure.

Highway Technologies, Inc

81 Texaco Road • Mechanicsburg, PA 17050 • 717-691-8007

THE

IZARD

THE

IZARD

Work Zone Alert

and

Information Radio

Wizard Field Operation Procedures

A guide for settings and message selection under

varying operating conditions.

Highway Technologies, Inc

81 Texaco Road • Mechanicsburg, PA 17050 • 717-691-8007

Table of Contents

Need help?

Do you have a question about the The Wizard and is the answer not in the manual?

Questions and answers

Summary of Contents for Highway The Wizard

Page 1 7” from an unobstructed antenna to avoid extended peri- ods of RF exposure. Highway Technologies, Inc Highway Technologies, Inc 81 Texaco Road • Mechanicsburg, PA 17050 • 717-691-8007 81 Texaco Road • Mechanicsburg, PA 17050 • 717-691-8007...
Page 2 Part 95 of the FCC rules or violation of type acceptance require- ments of Part 2 of the rules. The Wizard enclosure is a protected, weather resistant box. Boxes that are fully weather protected are available as an option.
Page 3 - mation CB Broadcast Message ………………………………9 To Confirm Complete Setup …………………………9 Meters Set The Wizard to Broadcast Automatically ………10 The “VOLTS” bar indicates the Remote Antenna Installation ……………………………10 level of DC power being provided to Construction Site Trailer ……………………………10 the unit.
Page 4 Although one-way communications are generally not allowed, oper - ation of the Wizard for its intended purpose is permitted. Rule 18 CB Broadcast Message (d) provides specific permission to establish one-way communica - tions concerning highway conditions to assist travelers.
Page 5 2. Push the “Assign A” button to designate to the system that the channel dis - automatic. played will be designated “Channel A”. Note: Although the Wizard is technically capable of being set to any of the 40 The broadcast should be CB channels, for simplicity the factory pre-selects 6 channels starting with 19 under the direct control of a and 9 - the channels that are normally used.
Page 6 Operation Message Set-up There is a provision for storing 3 different messages. Messages can be recorded in the field. They will be more readily understood if the back - ground noise is minimized, and the person recording the message speaks Antenna connector clearly.