Subscribe to Our Youtube Channel
Summary of Contents for Postium HLB-4K
- Page 1 User Manual Ver 19.1 High Dynamic Range LUT BOX-4K HLB-4K HDR Converter Operational Instructions...
-
Page 2: Table Of Contents
HLB-4K High Dynamic Range LUT BOX-4K Table of Contents 1. Precaution...........2 2. Location and Function of Controls.....4 3. Menu Organization........8 4. Menu Adjustment........9 5. Menu Operations........10 6. Available Signal Formats......14 7. Specifications..........15 8. Dimensions..........16... -
Page 3: Precaution
HLB-4K High Dynamic Range LUT BOX-4K 1. Precaution Always use set voltage. DC 12V All these instruc ons should be read and understood before opera ng the unit. If liquid is spilled on or impacts this product, please disconnect the product immediately and seek profession- al help before con nued use. - Page 4 HLB-4K High Dynamic Range LUT BOX-4K Do not a empt to service the product yourself. Removing covers can expose you to high voltage and other dangerous condi ons. Request a qualified service person to perform servicing. When the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteris cs and performance as the original parts.
-
Page 5: Location And Function Of Controls
HLB-4K High Dynamic Range LUT BOX-4K Location and Function of Controls Front Panel A : Input Selection Buttons Press the bu on to select the signal input. [HDMI] - Press the bu on to select HDMI input. [SFP SINGLE] - Press the bu on to select one channel of SFP input. The SFP Module should be connected to the SFP 1 Connector. - Page 6 HLB-4K High Dynamic Range LUT BOX-4K C : F1 ~ F3 Button Press to adjust or turn on/off the assigned func on. The following func ons are assigned at the factory. [F1] : Conversion Mode [F2] : Input Color [F3]...
- Page 7 HLB-4K High Dynamic Range LUT BOX-4K Rear Panel A : SDI IN (SDI Input) connectors (BNC) Used to input the SDI signal. B : SDI OUT (SDI Output) connectors (BNC) Used to output the SDI signal. C : HDMI input connectors Used to input the HDMI signal.
-
Page 8: Menu Organization
HLB-4K High Dynamic Range LUT BOX-4K 3. Menu Organization The LCD module displays the status informa on as follows. NO SIGNAL B T .709 B T .2020 NO SIGNAL A : Displays the input signal. The input port which is currently connected is displayed as an icon. -
Page 9: Menu Adjustment
HLB-4K High Dynamic Range LUT BOX-4K 4. Menu Adjustment 1. Enter the menu 1. Format When the MENU bu on is pressed, the OSD menu is displayed. 2 2 . Color Conversion 3. Function Key 4. System 5. Information 2. Enter the submenu F O R MAT Turn the SEL knob le or right to choose the menu. -
Page 10: Menu Operations
HLB-4K High Dynamic Range LUT BOX-4K 5. Menu Operations 1.Format * HDMI Color H D M I COLOR Adjusts the color of the HDMI input. - Auto : Reads the HDMI color characteris cs and adjusts the √ A uto color automa cally. - Page 11 HLB-4K High Dynamic Range LUT BOX-4K * Input In the HDR/SDR Conv. mode, when the input video is the I N P UT normal SDR signal, select SDR. - SDR : SDR(Standard Dynamic Range) √ S DR In the HDR/SDR Conv. mode, when the input video is the HDR signal, select the type.
- Page 12 HLB-4K High Dynamic Range LUT BOX-4K 3. Function Key F U N CTION KEY * F1 key, F2 key, F3 key Assigns the func on for F1 to F3 Key. F 1 Key The following func ons can be assigned.
- Page 13 HLB-4K High Dynamic Range LUT BOX-4K * Backlight S S YT EM Adjusts the brightness of the LCD display. Selects the value from 0 to 10. Ba c klight value 5. Information Displays the informa on of the unit. S YT EM * S/N Displays the serial number of the unit.
-
Page 14: Available Signal Formats
HLB-4K High Dynamic Range LUT BOX-4K 6. Available Signal Formats INPUT OUTPUT Transmission Color depth Transmission Color depth Signal format Signal format method / Standards method / Standards 1920x1080 60, 59.94, 50p LEVEL A 4:2:2 YCbCr 10bit 1920x1080 60, 59.94, 50p... -
Page 15: Specifications
HLB-4K High Dynamic Range LUT BOX-4K 7. Specifications ITEM HLB-4K 12G/6G/3G/HD/SD-SDI-1/2, 3G/HD/SD-SDI-3/4 4 x BNC Input 1 x HDMI HDMI 2.0 2 x SFP Op cal 4 x BNC 12G/6G/3G/HD/SD-SDI-1/2/3/4 Loop Output Output 1 x HDMI 1080p(Monitering) SMPTE ST 2082 2160p(60/59.94/50) -
Page 16: Dimensions
HLB-4K High Dynamic Range LUT BOX-4K 8. Dimensions Dimensions(W x H x D) : 210 x 44 x 168 mm / 8.26 x 1.73 x 6.61 inch... - Page 17 208, Building A, Samsong Techno Valley, 140, Tongil-ro, Deogyang-gu, Goyang-si, Gyeonggi-do, Korea, 10594 Tel : +82.2.354.6055 / Fax : +82.2.354.6056 E-mail : sales@postium.com www.postium.com...
Need help?
Do you have a question about the HLB-4K and is the answer not in the manual?
Questions and answers