Table of Contents
Advertisement
Picture settings
PICTURE
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
DDVa
COLOUR TEMPERATURE
BACK
Note:
After a short while the »PICTURE« menu reappears. The settings are saved as the »USER«
picture default setting.
Setting the picture features
22
PICTURE
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
DDVa
COLOUR TEMPERATURE
BACK
Select »COLOUR TEMPERATURE« with
or
. Press »
» «
» «
DDVa
(Model
You can increase the picture sharpness byselecting DDVa as ON.
IMPORTANT NOTE: Your TV has Digital Comb Filter, DLTI (Digital Luminance
Transient Improvement), CTI (Colour Transient Improvement) features to improve picture
quality. These features are set ON and they can not be changed by the end user.
TILT
(Model
Because of the structure of the picture tubes, your picture can be lost on the corners of the
screen depending on the position of your TV, north-south-east-west.
To clear this effect, you can adjust the TILT setting and prevent the picture loss
dependant).
Press »
– The »MAIN MENU« appears.
Select »PICTURE« with
ON
»
«.
NORMAL
– The »PICTURE« menu appears.
Select »BRIGHTNESS«, »CONTRAST«, »COLOUR« or
»SHARPNESS« with
BACK
or
» «
You can set the noise suppression of the picture.
You can set the noise suppression to one of three settings:
»NORMAL«, »WARM« and »COOL«.
ON
Press »
NORMAL
– The »MAIN MENU« appears.
Select »PICTURE« with
»
«.
BACK
– The »PICTURE« menu appears.
EXIT
« to finish the settings.
dependant) (Dynamic Digital Video Adaption):
dependant):
MENU
« to open the »MAIN MENU«.
»
»
«, »
EXIT
. Press »
« to finish the settings.
» «
MENU
« to open the »MAIN MENU«.
»
»
«, »
«
and confirm with
«, »
«
and adjust them with
«
and confirm with
«, »
«
and set the desired value with
(Model
Advertisement
Table of Contents
