Table of Contents
Advertisement
ELOCK PLUS
Change the User code
3
Press Enter key during 3 seconds.
Introduce Current code and press Enter.
Introduce New code and press Enter.
Open using Master code: Inspection mode / Delete User code
4
INSPECTION MODE
Introduce Master code and press Enter.
Close the lock by pressing Enter before 30s.
The User code is not deleted.
www.keya.cat
press during 3 seconds
CURRENT Code
To open:
DELETE USER CODE
Introduce Master code and press Enter.
After 30s. the lock remains opened.
The user code has been deleted and a new User
code will be required to close the lock again.
NEW Code
MASTER code
-30s
+30s
INSPECTION
USER
MODE
ERASED
5
Advertisement
Table of Contents
Need help?
Do you have a question about the ELOCK PLUS and is the answer not in the manual?