General Pump DHR50100D Operating Instructions

ASSEMBLY AND OPERATING INSTRUCTIONS
1. Connect the handle to the flange. Nuts go on handle side of flange.
2. Use (4) 3/8" or 10 mm bolts when securing the hose reel to ceiling or
wall.
3. Use the provided nuts, bolts and mounting bracket when securing
hose reel to a cart.
4. Use thread sealant (not provided) on inlet threads and on outlet hose
(not provided).
5. Attach pigtail end to high pressure pump outlet.
6. Attach hose reel hose to swivel on hose reel
7. The hose reel is ready for operation.
SAFETY PRECAUTIONS
1. Make sure incoming pressure does not exceed
the rated pressure.
2. Use proper eye protection when assembling and
using the hose reel.
3. Assemble the hose reel on a clean workbench
free of debris and moisture.
4. Use soap and water when checking for air leaks.
5. Keep children away from work area.
WARNING!
Exposure of skin directly to
pressurized air or fluids could
result in severe bodily injury!
General Pump
1174 Northland Drive • Mendota Heights, MN 55120
Phone: 651.686.2199 • Fax: 800.535.1745
www.generalpump.com • email: sales@gpcompanies.com
Ref 300631 Rev. J
08-18
• Direct hand-crank rewind
with locking mechanism
• Solid steel construction
• Durable powdercoat finish
• Full flow swivel Steel joint
Operator's Manual
Ref 300631 Rev. J
08-18
General Pump
is a member of
The Interpump Group
INDUSTRIAL
Hose
Reels
From General Pump
DHR50100D
DHR50150D