Advertisement
ENGLISH
The Test-n-Map Remotes #2 - #8 come with an RJ45 port. In order to use these remotes with an RJ11 or RJ12 Jack, an
adapter cable must be used.
CAUTION: Failure to use the Klein Tools Universal RJ12 Jumper Cable (VDV726-125) or an approved equivalent may
result in damaged contact pins in the remote.
1.
Remove single screw in the middle of the back of the VDV Scout
Remove battery door.
2.
Disconnect battery cable and recycle exhausted battery.
3.
Acquire a 9 volt alkaline battery (IEC 6LR61, ANSI/NEDA 1640A).
4.
Connect battery cable to new battery observing polarity and place into battery compartment.
5.
Replace battery door and screw, taking care not to over-tighten it.
Turn instrument off and disconnect any cables. Clean the instrument by using a damp cloth. Do not use abrasive cleaners
or solvents.
Remove the batteries when instrument is not in use for a prolonged period of time. Do not expose to high tempera-
tures or humidity. After a period of storage in extreme conditions, allow the instrument to return to normal operating
conditions before using it.
Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with
local regulations.
Prior to disposal of this product, please contact Klein Tools for proper disposal options.
4
TELEPHONE JACK TESTING
BATTERY REPLACEMENT
WARRANTY
www.kleintools.com/warranty
CLEANING
STORAGE
DISPOSAL / RECYCLE
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
1-800-553-4676
www.kleintools.com
Pro 2 with a #1 Phillips head screwdriver.
®
VDV726-125
Advertisement
