Installing And Removing The Battery Pack; Operation - Black + Decker YARDMASTER BCASBL70 Instruction Manual

20v max sweeper
Table of Contents

Advertisement

Available languages

Available languages

English
Fig. F
7

Installing and Removing the Battery Pack

(Fig. G)

WARNING:
switch is engaged to prevent switch actuation before
removing or installing battery.
nOTE: For best results, make sure your battery pack is
fully charged.
To install battery pack: Insert battery pack 
housing 
 14 
as shown in Fig. G until fully seated and an
audible click is heard.
Make sure battery pack is fully seated and fully latched
into position.
To remove battery pack: Depress the battery release
button 
 13 
on the battery and pull battery pack out
of appliance.
Fig. G
12

OPERATION


WARNING:
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can cause injury.
8
2
Make certain the lock-off
 12 
into battery
13
14
To reduce the risk of

WARNING:
circumstances should this product be used near water.

WARNING:
within the base unit become hot during use. Avoid
contact with moving parts within base unit when
removing and installing accessories.

WARNING:
protection that conforms to ANSI Z87.1 (CAN/CSA
Z94.3) while operating this appliance.

CAUTION:
is dusty. Use of gloves, long pants and substantial
footwear is recommended. Keep long hair and loose
clothing away from openings and moving parts.
Switching On (Fig. H)
Base mode
1. Push the lock off switch 
OFF switch 
 4 
. Once the unit is running, you may release
the lock off switch. The more the ON/OFF switch 
depressed, the higher the speed of the base unit.
2. In order to keep the unit running you must continue
to squeeze the ON/OFF switch 
release the ON/OFF switch 
Pole mode
1. Push the lock off switch 
OFF switch 
 4 
. Once the unit is running, you may release
the lock off switch. The more the ON/OFF switch 
depressed, the higher the speed of the base unit.
2. In order to keep the unit running you must continue
to squeeze the ON/OFF switch 
release the ON/OFF switch 
Fig. H
5
Sweeping (Fig. I, J)
Base mode
Hold the main handle with one hand as shown in Fig. I
and sweep from side to side with the nozzle several inches
above the surface.
Slowly advance keeping the accumulated pile of debris
in front of you.
Shock hazard. Under no
Burn hazard. Moving parts
Always use proper eye
Wear a filter mask if the operation
 5 
down and squeeze the ON/
. To turn the unit off,
 4 
.
 4 
 5 
down and squeeze the ON/
. To turn the unit off,
 4 
.
 4 
4
 4 
is
 4 
is

Advertisement

Table of Contents
loading

Table of Contents