Advertisement
ROTARY MUCK SPREADERS
OPERATING & SAFETY INSTRUCTIONS
FOR SPARE PARTS GO TO
WWW.MARSHALL-TRAILERS.CO.UK
FOR MODELS:
MS45, MS60, MS75, MS90, MS105
CHARLES J. MARSHALL (ABERDEEN) LTD
CHAPEL WORKS, BUCKSBURN, ABERDEEN, AB21 9TL.
Telephone: 01224 722777
Fax: 01224 724034
Email: charles@marshall-trailers.co.uk
www.marshall-trailers.co.uk
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Marshall Amplification MS45
Summary of Contents for Marshall Amplification MS45
- Page 1 ROTARY MUCK SPREADERS OPERATING & SAFETY INSTRUCTIONS FOR SPARE PARTS GO TO WWW.MARSHALL-TRAILERS.CO.UK FOR MODELS: MS45, MS60, MS75, MS90, MS105 CHARLES J. MARSHALL (ABERDEEN) LTD CHAPEL WORKS, BUCKSBURN, ABERDEEN, AB21 9TL. Telephone: 01224 722777 Fax: 01224 724034 Email: charles@marshall-trailers.co.uk www.marshall-trailers.co.uk...
-
Page 2: Ec Declaration Of Conformity
EC DECLARATION OF CONFORMITY WE: CHARLES J. MARSHALL (ABERDEEN) LTD CHAPEL WORKS, BUCKSBURN, ABERDEEN, SCOTLAND, AB21 9TL. DECLARE THAT THE PRODUCT: MAKE: CHARLES J. MARSHALL (ABERDEEN) LTD TYPE: MARSHALL ROTARY MUCKSPREADER MODEL: _______________________________ SERIAL NO: ______________ CONFORMS TO THE ESSENTIAL HEALTH & SAFETY REQUIREMENTS OF 98/37/EC MACHINERY DIRECTIVE AS AMENDED BY 2006/42/EC DIRECTIVE. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS Important Safety advice! 1. STOP 2. THINK 3. CALL 01224 722777 Safety First: Please read and fully understand the contents of this instruction manual, if you are in any doubt whatsoever of the safe operation of this machine, please contact Charles J. Marshall (Aberdeen) Ltd on Tel. -
Page 4: Maintenance Instructions
BEFORE USING CHECK THE FOLLOWING: 1. Ensure there is tension in the drive line and that side play does not exceed 20mm. 2. Ensure that all bolts that are not accessible when the guard is in place, particularly those securing the small drive shaft bearings, are tight. 3. - Page 5 4. 1999 – Chain tensioning brackets on all models used a bolt on front until 1999. 5. 2001 – Larger lid fitted. 6. 2001 – Lights fitted to MS60, MS70, MS85, MS105/T & MS155/T 7. 2002 – All MS45, MS70, MS85 used splined PTO shafts up to 2002.
- Page 6 Part Number Size Maximum Weight Speed Max Tyre Pressure Please note this chart is for reference only each tyre brand can have different ratings. 083/01-26-12 26 x 1200 x 12 800kg 25km/h 20psi 083/01-100-12 10.0/80x12 10ply 1000kg 30km/h 45psi 083/01-100-15 10.0 x 15.3 1500kg 30km/h...
- Page 7 MARSHALL PRE-DELIVERY INSPECTION CHECK Dealer Name: Customer’s Name: Contact No: Address: Post Code: Model: Serial Number: Check Completed Check Tyre Pressure (See chart on page 6) Tighten Wheel Nuts (18mm Stud Diameter = 270Nm / 22mm Stud Diameter = 475Nm) Grease Hubs Check External Wheel Bearing (Ensure No Side Movement on Wheels)
Need help?
Do you have a question about the MS45 and is the answer not in the manual?
Questions and answers