Page 1
EMF Personal Monitor WaveMon USER’S MANUAL V 1.0 +34 93 320 80 55 www.wavecontrol.com info@wavecontrol.com Safety, Quality, Service...
Page 2
Wavecontrol assumes no responsibility or liability of any kind for errors or omissions in the contents of this document. Although the information contained herein is correct to the best of Wavecontrol’s knowledge, it is provided with no guarantees of completeness, accuracy, usefulness or timeliness and without any warranties of any kind, express or implied.
Disposal of your old product: WaveMon. Your product is designed and manufactured with Your WaveMon is a portable apparatus high quality materials and components, which with a rechargeable battery. Before taking any can be recycled and reused. measurement, make sure that the battery is...
User’s Manual Personal equipment WaveMon 2. INTRODUCTION The WaveMon is a personal electromagnetic Warnings are given based on instantaneous field monitor. Its main function is to monitor the field values. However, measurements are taken user’s exposure. For that purpose, it should be...
• Non-elastic band to fasten the device to a harness. Check that you have received all the components of the WaveMon and its accessories as ordered. If any of those components are missing, please contact your distributor or Wavecontrol at service@wavecontrol.com.
User’s Manual Personal equipment WaveMon 4. FIRST STEPS The WaveMon is an easy-to-use and very The sequence is:: complete electromagnetic field monitor. To switch • 2 beeps it on, press the ON/OFF button on the front panel. • vibration for 1 second The device will switch on and go through the •...
User’s Manual Personal equipment WaveMon When it is switched on, the WaveMon will show The user can learn the field strength by observing the strength of the present electric or magnetic the number of blinking lights. Field strength field by means of signal lamps. The ambient...
User’s Manual Personal equipment WaveMon 6. PLACING THE DEVICE The device is supplied with a mount to which a. Using the mount it may be attached using a quick release - With the elastic band to fasten it to your mechanism.
Page 11
In a pocket, detached from the mount. Important: When working at heights, the opening on the bottom of the WaveMon can be used to fasten it to a harness. This is particularly advisable to keep it from being dropped if the device is to be used without its mount as mentioned above.
8. GPS AND ALTIMETER OPTION As optional features, the WaveMon can have an internal GPS receiver and an altimeter so that each reading can be automatically associated with a geographical position.
9.2 Displaying information The WaveMon software is an easy-to-use tool, with two main functions: The first step is to run the “WaveMon Reader” program. The main screen will show a picture of • Displaying and downloading recorded the WaveMon and prompt you to connect it to measurements.
If you wish to download the same register again, the software will check whether the files in the WaveMon and in the computer are identical before downloading it again. These files are available in the Windows user’s folder, in /Wavecontrol/WaveMon_Reader.
9.4 Registration When the software is run and the WaveMon is connected for the first time, a pop-up window will appear allowing you to register with the Wavecontrol intranet. We strongly recommend...
To charge the WaveMon battery, connect the batteries. When it is switched on, the device WaveMon cable to a USB charger or a computer. indicates the battery charge level: blinking white A full charge takes approximately 4 to 5 hours.
1. Update the WaveMon Reader (see previous Wavecontrol’s web page. point). 2. Run the WaveMon Reader software. 3. Connect the WaveMon to the PC using the Intranet: www.wavecontrol.com, Home Log-in. USB cable. Step 1: Registration The WaveMon Reader will automatically detect...
User’s Manual Personal equipment WaveMon 13. Maintenance The WaveMon requires very little maintenance, To recalibrate your equipment, please contact although it should be handled with care, as with your local distributor or Wavecontrol at any professional measurement equipment. service@wavecontrol.com. Wavecontrol offers...
User’s Manual Personal equipment WaveMon 14. Technical specs Sensor type Isotropic, RMS diode technology Response Shaped (occupational ICNIRP 1998, FCC, SC6 or European Directive) Interface 1 button on/off, status and low battery LED Indicators 6 LEDs + Audio + Vibration...
Page 21
User’s Manual Personal equipment WaveMon Standard (occupational) E Field H field Frequency range ICNIRP 1998 1 MHz - 8 GHz 25 MHz - 1 GHz (frequency response) EMF Directive 2013/35/EU (±3,5 dB) (±1 dB (30 MHz - 700 MHz) +0 dB/-2,5 dB (700 MHz - 850 MHz)
One of the important things that you can do via the intranet is keep your WaveMon device always up to date. Wavecontrol offers you regular updates of the WaveMon firmware and the WaveMon Reader software, free of charge.
EN 55011:2016 + A1:2017 Object of the declaration: Industrial, scientific and medical equipment - WaveMon Broadband (Personal EMF Monitor) Radio-frequency disturbance characteristics - Limits and methods of measurement. The above mentioned product complies with the IEC-EN 61000-4-2:2010...