PARTS LIST NUMBER DESCRIPTION QUANTITY BACK BASE MAIN BASE FRONT BASE MAIN VERTICAL BEAM ADJUSTMENT TUBE TOP CROSS BEAM GUIDE ROD FOAM TUBE SEAT PAD SUPPORT LONG JOINT PLATE PULL BOW LAP BOW WEIGHT PLATE SLEEVE SHORT JOINT PLATE NYLON BUSH SEAT PAD JOINT TUBE PULLEY SUPPORT...
ASSEMBLY INSTRUCTIONS 1. Attach the front base (C) to the main base (B) with the bolt M10*85 + two washers + nut (9). 2. Attach two plastic end caps (1) to the back base (A). 3. Insert the guide rod (G) into the hole on the back base (A), then attach the...
Page 5
1. Through the end with no ball of the long cable round pulley 1 on top cross beam (F), then through the cable in the tube of top cross beam, attach a pulley to part 2 with bolt and bushing. See to it that the cable is above the bolts to avoid damages of the cable.