Set The Date And Time - Icon Time TotalPass P600 Quick Start Manual

4

SET THE DATE AND TIME

TotalPass P600 Time Clock
1. Plug the power supply into the port located on the bottom of the clock.
2. Plug the power supply into a wall outlet.
3. The display will read: Set Date/Time.
^
4. Press
or
5. Follow the same procedure to advance through each step as prompted to
complete the date and time setup. If you make a mistake, press Clear on
the time clock to go back and correct the entry.
6. Once you've completed these steps, the time clock will display:
Date and Time Set.
If the clock detects a Wi-Fi connection, the display will read:
Network Detected Press Enter.
on the time clock to select the current month. Press Enter.
Power Supply
Wall Outlet