Advertisement
Xtream
Voice
Remote
Remote Instructions
1 Make sure your new Voice Remote is within 3 feet of the front of your TiVo
and insert the batteries into the remote.
2 Press the TiVo button, located at the top of the remote, use the Left Arrow button
to show the menu. Click Menu > Settings > Remote, CableCARD & Devices > Remote
Control Setup > Remote Control Pairing.
While on this screen, press the TiVo and Back buttons at the same time and Hold until
the light at the top of the remote is solid red. When released the light starts flashing
yellow/amber. When the light stops blinking, press the TiVo button to return to the
Home Menu.
Press the blue Voice button on the remote to confirm the blue Voice icon
appears on your TV screen. Your TiVo box is now voice enabled.
Note: If the voice icon does not appear go to Menu > Settings > Remote, CableCARD & Devices
> Remote Control Setup > Reset Remote Control Pairing and select Unpair all remote
controls and then repeat Step 2.
3 Perform a 'Connect to TiVo' by navigating to Home screen > left arrow to Menu >
Settings > Network Settings > TiVo Service Connection.
box,
®
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Xtream Voice Remote
- Page 1 Xtream Voice Remote Remote Instructions 1 Make sure your new Voice Remote is within 3 feet of the front of your TiVo box, ® and insert the batteries into the remote. 2 Press the TiVo button, located at the top of the remote, use the Left Arrow button to show the menu.
- Page 2 ‘0’ you can go to urcsupport.com to search for your code. On the urcsupport.com home page select ‘View All Products’ . Click ‘Code Finder’ under the TiVo S6 Voice Remote. Follow the on-screen instructions under ‘Remote Control Setup’ to program your remote.
Need help?
Do you have a question about the Voice Remote and is the answer not in the manual?
Questions and answers
how do i deivate ivate voice control on remoteact
how do i deactivate voice control on remote
To deactivate voice control on the Xtream Voice Remote, you need to unpair the remote. Follow these steps:
1. Press the TiVo button on the remote.
2. Go to Menu > Settings > Remote, CableCARD & Devices > Remote Control Setup > Reset Remote Control Pairing.
3. Select Unpair all remote controls.
4. Repeat the remote pairing process if needed without using the voice feature.
This will disable voice control on your Xtream Voice Remote.
This answer is automatically generated
Where is the button to go back to previous channel on this remote