Thank you for purchasing The VSSI following page to identify features Hydraulic Surgery Table ! of The VSSI Hydraulic Surgery Table . Open packages carefully. Please inspect the shipping carton and contents for any visible damage. This is important in the...
Surgery Table: only minor attention to be fully serviceable. After removing the When moving a V-top surgery table, table from its packaging, the table NEVER lift the table by its V-panels! needs to be placed in the desired If your table is equipped with the position within your facility.
This Lever is he VSSI Hydraulic Surgery Tables are located in the designed for easy one-handed adjustment same position of table tilt and V-top panel angles. Simply on Flat-Top depress the desired touch control lever tables while simultaneously adjusting the top angle.
Page 6
Features/Operation continued Heated Top Option: CAUTION: Covering the animal during surgery will cause heat generated The optional heated top provides thermal from the top to be trapped, resulting support to help prevent hypothermia in an excessive rise in temperature. during surgery. The heated top should be This may cause the animal to be between 15°...
“uphill” end of the table. retainer The drain reservoir will now slide out of the table Troubleshooting In the event that a problem occurs, a VSSI VSSI Technical Support: factory technician is ready to assist you. 1-800-299-9525 Please call VSSI for assistance before...
Care & Cleaning Avoid use of chlorine bleach The VSSI Hydraulic Surgery Table may be cleaned with any commercially for cleaning. Chlorides, bromides, available product recommended for use iodides and thiocyanates will cause on stainless steel. Frequent cleaning will pitting, corrosion and discoloration of prolong the life and help maintain the any stainless steel.
Two extensions provide 20" of additional work surface length. For 50" table only. No. 200-3041-10 V-Top Extension 10" stainless steel table top extensions for flat-top surgery tables are available. Extensions may be added to each end. Two extensions provide 20" of additional work surface length.
VSSI, Inc. may, at its own discretion, arrange for the customer’s account to be credited (excluding shipping charges) or replace the product. The customer must notify VSSI of any claim of nonconformity or defect in writing within 30 days from the date of receipt. The product must be returned to VSSI in its original packaging, undamaged and showing no unusual wear within 20 days of the customer’s written notice.