General Setup; Charging The Unit; Usage And Maintenance Of The Battery; Connecting To The Tv - DBPOWER PD158 Quick User Manual

@dbpower.co

GENERAL SETUP

Charging the unit

This player is powered by a lithium-polymer battery. It features a high
energy to weight ratio. It can be recharged at any time regardless of
whether it is fully or partially discharged. It takes about six hours to fully
charge the battery and a fully charged battery can be used for up to 3
hours.
Connect the attached AC/DC adaptor to the DC INPUT jack on the
unit, then plug the adaptor into a AC outlet.
Note: Make sure you switch off the unit before charging. The charging
indicator LED will change from RED to GREEN to indicate that the
battery has been fully charged.

Usage and maintenance of the battery

1. The operating temperature of the rechargeable battery ranges from
5°C to 40°C.
2. Always unplug the unit when it is not being used unless it is being
charged.
3. Heat is inevitably produced during playback, this is normal. However
switch off and allow it to cool down.
4. Do not subject the battery to force and keep it away from heat and
moisture.

Connecting to the tv

This unit can be connected to a TV in order to enjoy high-quality music,
movies etc with a TV.
Use an AV cable to connect the AV OUT jack on the unit to the AV IN
jack of a TV.
DVD player has sound and video input jacks for connecting external
audio and video inputs.
support@dbpower.co
- 14 -