OBDLink LX Bluetooth Quick Start Manual

OBDLink LX Bluetooth
Android Quick Start Guide
Android
1
Download & install OBDLink app
Scan the QR code or visit the URL from your Android
device to download the OBDLink app:
obdlink.com/app
2
Plug LX Bluetooth into the diagnostic link
connector (DLC)
The DLC is usually found on the driver's side, under
the dash.
– Can't find your DLC? Visit
3
Turn ignition to Key On, Engine Off
position
P OBD H
OWER OST
'POWER' LED will turn ON, and the 'BT' LED will
start flashing slowly.
– LEDs are off? Check vehicle for blown fuses.
4
Open 'Settings' app, and enable
'Bluetooth'
5
Tap 'Bluetooth - Pair with a device'
6
Press the 'Connect' button on LX
P
OWER
dlc-locator.com
'Connect'
button
The 'BT' LED will switch to a fast blink.
BT
7
Wait for OBDLink LX to appear on the
'Available devices' list
Tap 'Scan' if OBDLink LX does not show in 'Available
devices' .
8
Tap 'OBDLink LX' to pair the device
OBD H BT
OST
Attention!
You must complete steps 7, 8, and
9 within 2 minutes. If you need
more time, press the button again.
[instructions continue on reverse]